RPM 500ml Multi-Purpose PU Foam Sealant

Key technical specifications include a density of 29 kg/m³, a compression load of 4.5 kPa, a tensile strength greater than 100 kPa, and an elongation at a break of over 160%.

It is suitable for fine painting, varnishing, and creating textured effects, effective for both professional and DIY projects.

The foam has high tear resistance, maintaining its integrity and performance under rigorous use.

It is compatible with a wide range of paints, including both water-based and solvent-based options.

The foam is easy to clean, allowing for multiple uses and extended lifespan with proper maintenance.

It is available in a 500ML size, convenient for various painting tasks.

RPM Multi Purpose PU Foam can be purchased online from various retailers and specialized foam and paint supply stores.

RPM Multi Purpose PU Foam is a 500ml aerosol sealant designed for various applications, including sealing gaps, cracks, and crevices. It is known for its fire-retardant and water-resistant properties, making it suitable for both indoor and outdoor use.

This product is primarily used in construction and DIY projects to isolate and seal areas effectively. It can be applied in industrial, consumer, and professional settings for insulation and sealing purposes.

The foam has a low-pressure expansion time of approximately 2 hours before it fully sets. This allows enough time for adjustments during application.

Users should wear protective gloves, safety glasses, and suitable clothing to avoid skin and eye contact. It is also crucial to ensure good ventilation during application due to the product's flammable nature.

RPM Multi Purpose PU Foam should be stored in a cool, well-ventilated area away from direct sunlight and temperatures exceeding 50°C (122°F). The container must be kept tightly closed when not in use.

While the product is not considered harmful to aquatic organisms, precautions should be taken to avoid environmental release. Users are advised to dispose of any residues responsibly at authorized sites.

The foam appears as a light yellow liquid under pressure with a characteristic odour. It has a density ranging from 19 to 25 kg/m³ and is classified as an extremely flammable aerosol.