SATA GL13611 1/2" Drive 12 Point Socket 20mm

A 12-point design provides multiple entry angles, allowing easier alignment with fasteners in confined spots. It improves engagement on worn or rounded heads and reduces the chance of slipping, especially when working under time pressure or in cramped areas.

Key specs: 1/2" drive, 20mm socket size, 12-point design, chrome vanadium steel construction, chrome-plated finish for corrosion resistance, clearly marked SAE and metric references, off-corner loading for reduced rounding, and knurled marking lines for quick size identification.

Off-corner loading concentrates force on the corners of the fastener, reducing the likelihood of rounding or rounding damage and improving tool longevity during high-torque operations.

Attach the socket to a standard 1/2" drive ratchet, align the tool with the fastener, and apply steady, controlled torque. Use in appropriate angles to maximize engagement, and avoid using impact drivers unless the socket is rated for impact use.

It's versatile for automotive repairs (engine, suspension, brake work) and industrial maintenance where 20mm fasteners are encountered, including assembly/disassembly tasks that demand durable, high-torque performance.

The socket features large, easy-to-read size markings and dual SAe/metric indicators. The knurled lines help confirm metric or SAE references at a glance, aiding quick selection in busy toolboxes.

Wear eye protection and gloves, ensure the fastener is properly supported, engage the fastener fully before applying torque, and avoid using damaged or bent components. Do not use the socket with an impact wrench unless the manufacturer specifications allow it.

Wipe the socket after use to remove oil and debris, dry thoroughly to prevent rust, and store in a clean, dry toolbox. The chrome plating provides corrosion resistance, but regular cleaning helps preserve the finish and size markings.

For similar tools on Fepy, you can explore these alternatives: SATA GL13610-12-point socket (20mm, 1/2" drive) at https://fepy.com/product/sata-gl13610-12-point-socket-20mm-1-2-drive and SATA GL13612-12-point socket (20mm, 1/2" drive) at https://fepy.com/product/sata-gl13612-12-point-socket-20mm-1-2-drive. These presets offer comparable 12-point engagement with slight design variations or markings to help you choose the best fit for your toolkit.

Yes, it combines a durable chrome vanadium body with a corrosion-resistant finish and practical features like large markings and off-corner loading. When evaluating value, consider the material quality, finish, size readability, and the availability of complementary tools in the same drive set.

Tip 1: Confirm the fastener size (20mm) before seating the socket. Tip 2: Align the socket squarely with the fastener to minimize slippage. Tip 3: Use steady, controlled torque to avoid rounding, and switch to a more appropriate drive if you encounter resistance. Tip 4: When not in use, store with other 1/2" drive sockets to keep markings clear and prevent corrosion.

This socket is designed for standard 1/2" drive ratchets and tools. Verify compatibility with your specific ratchet's drive width and tolerance, and avoid forcing the tool onto a fastener if it resists engagement to prevent damage.