SATA GL80114A Extra Long Ball Point Hex Key 8mm

It’s up to 30% longer than standard hex keys, providing extended reach to access deep or recessed fasteners and enabling better leverage to apply torque in tight spaces.

The ball point tip lets you enter fasteners at angles, up to about 25 degrees, which improves maneuverability and makes it easier to engage fasteners in cramped or awkward spots.

It’s made from high-strength chrome vanadium steel (Cr-V) with a corrosion-resistant coating to extend tool life in challenging environments.

The tool has an 8mm hex tip and fits 8mm hex fasteners.

It’s ideal for automotive work, machinery maintenance, and furniture assembly where access is limited and an extended reach plus angled entry helps you reach stubborn or deep-set fasteners.

Insert the tip squarely into the fastener, apply steady, controlled torque, and keep the entry angle within the ball-end limit (about 25 degrees). Do not use it as a pry tool or in impact tools, and wear proper eye and hand protection as needed.

Wipe it clean after use, keep it dry, apply a light coat of oil to prevent rust, and store it in a dry toolbox. Regularly inspect the tip for wear and replace if it becomes rounded or damaged.

Always use the correct size to avoid damaging fasteners, avoid exceeding rated torque, and keep the tool away from children. Use in appropriate conditions and with PPE as needed.

If you need alternatives, consider these nearby sizes from the same family: 9mm option SATA GL80115A, 7mm option SATA GL80113A, and 6mm option SATA GL80112A. See the product pages for exact specs and compatibility: https://fepy.com/product/sata-gl80115a-extra-long-ball-point-hex-key-9mm, https://fepy.com/product/sata-gl80113a-extra-long-ball-point-hex-key-7mm, https://fepy.com/product/sata-gl80112a-extra-long-ball-point-hex-key-6mm

The extra length increases reach and leverage for hard-to-reach fasteners, while the ball-end enables angled insertion to reduce stripping and slipping in tight spots, making it especially useful in automotive and machinery tasks.

This hex key is a standalone 8mm Cr-V ball-end key designed for standard hex fasteners. For best results, pair it with compatible drivers or organizers from SATA’s range, and keep it dedicated to hex fastener applications to preserve its tip integrity.