SATA GL92534 Hard Face Hammer Tip 45mm

The tip features hardened steel with a hard-face coating or surface. Benefits include enhanced impact resistance, reduced surface marring and dents, better wear life, and less deformation during use.

Ideal for metalworking and construction tasks, as well as installation work where you want to protect surfaces from damage while delivering reliable impact.

Ensure your hammer head supports interchangeable tips, remove the worn tip, align the new 45 mm tip with the hammer’s retaining mechanism, insert fully, and secure according to your hammer model. Test on scrap material before using on a workpiece.

Key specs: tip diameter 45 mm; hard-face construction for durability; interchangeable design for easy replacement; compatible with hammers that accept interchangeable tips.

The tip is designed to swap out when worn or damaged and typically fits hammer bodies that support interchangeable tips. Compatibility varies by hammer model, so verify that your hammer accepts SATA interchangeable tips and matches the GL92534 size.

Replace the tip when you notice wear on the contact face, such as a flattened, chipped, or uneven surface, or if you experience reduced impact efficiency or increased surface marking.

Wear eye protection and gloves, ensure the hammer is properly secured and in good condition, use the tip only on appropriate surfaces, avoid striking edges or brittle materials, and keep the work area clear to prevent injuries.

Compared with standard (non-hard-faced) tips, this hard-face version provides better resistance to impact, less surface marring, and longer service life. Other hard-face options may vary in face geometry, diameter, and recommended applications, so choose based on your material and task requirements.

If you’re comparing options, you can consider these alternatives available on Fepy:

URL: https://fepy.com/product/sata-gl92535-hard-face-hammer-tip-50mm Notes: Slightly larger diameter for different applications; compatible with hammers supporting 50 mm tips and interchangeable-tip designs.

URL: https://fepy.com/product/sata-gl92533-hard-face-hammer-tip-40mm Notes: Narrower diameter for precision or smaller work areas; interchangeability with compatible hammer heads.

URL: https://fepy.com/product/sata-gl92532-hard-face-hammer-tip-30mm Notes: Small-diameter option for delicate surfaces or tight clearance tasks; verify compatibility with your hammer model.

Yes. The hard-face, non-marring surface is designed to minimize surface damage while delivering reliable impact across metalworking, construction, and installation tasks.

Keep the tip clean and dry, store in a protective case or on a tool rack, inspect regularly for wear, and replace when the face shows significant wear to maintain performance.