SATA ST34528SC 3/4" Drive 6 Point Impact Socket 40mm

Yes, it is designed for use with 3/4 inch drive impact ratchets or impact wrenches. Make sure your tool is rated for impact use and the drive size matches the socket to ensure proper engagement and performance.

If the socket does not meet your expectations, you can initiate a return under the store's standard return policy. Ensure the item is in unused condition as required by the policy and follow the provided return instructions.

Confirm that your tool supports a 3/4 inch drive and is compatible with impact sockets. Verify the fastener type is appropriate for a 6 point design and ensure the socket size matches your fastener. Inspect the socket for any signs of damage before use.

Use this socket in automotive maintenance, heavy equipment repair, and any high torque fastening jobs where a robust 3/4 inch drive tool helps speed up repairs while reducing fastener rounding.

If you are dealing with very high torque, the 3/4 inch drive is better suited than smaller drives for maximum load transfer. For comparison with alternatives on Fepy, you can consider the following:

It is made from premium impact resistant steel designed to withstand high torque. The off corner loading and solid construction contribute to reducing fastener rounding and extending tool life.

Use with a 3/4 inch drive impact ratchet or impact wrench. Ensure the socket fully engages the fastener and avoid side or angled loads. Do not use non impact rated tools with this socket and keep tools clean and dry to prevent corrosion.

This listing is for a single 6 point socket. It does not include a ratchet, extensions, or other accessories.

Ideal for automotive repairs, construction, heavy equipment maintenance, and any high torque fastening tasks where a robust 3/4 inch drive socket is needed with an impact tool.

The SATA ST34528SC features a 40mm socket size with a 3/4" drive, suitable for heavy-duty impact applications.

The 6 point design provides a secure grip on the fastener, distributes torque more evenly, and helps prevent rounding or slipping under high torque compared to some 12 point designs.

It is a heavy duty 3/4 inch drive, 6 point impact socket intended for use with impact drivers. The off center loading design helps reduce fastener rounding, and large size markings make it easy to identify the socket size quickly during tough jobs.

The SATA ST34528SC 40mm socket weighs approximately 0.54 kg.

It is commonly used in automotive repair, heavy equipment maintenance, and industrial assembly.