Schneider 40A TP with 40A 4P A Type Fixed ELCB (With Enclosure) Set

TP typically indicates a three-phase supply with a neutral, and 4P means four poles. The A-Type ELCB is an earth leakage type device that detects imbalance between live conductors and the neutral/earth, helping to prevent electric shock and protect equipment.

Key specs include: 40A rating, TP (three-phase with neutral) configuration, 4-pole A-Type ELCB, fixed enclosure installation, anti-corrosive enclosure for durability, and suitability for integration into standard distribution boards. Exact operating voltage and sensitivity details are described in the product page’s specifications.

1) Ensure the main supply is switched off and locked out. 2) Remove the panel cover where the enclosure will be mounted. 3) Mount the enclosure securely in a suitable enclosure or panel cutout. 4) Connect L1, L2, L3 (and neutral if used) to the ELCB input terminals and connect the load side to the circuit protected by the ELCB. 5) Connect earth/ground properly. 6) Recheck all connections, close the panel, and test the ELCB according to your local electrical codes.

It's well-suited for residential or commercial distribution boards that require integrated protection for 3-phase systems. It’s ideal where you want a compact, fixed, weather-resistant enclosure with a built-in ELCB to safeguard people and equipment from earth leakage faults.

The unit is designed for safe installation in appropriate electrical enclosures and protected by an ELCB. For safety and compliance, ensure installation follows local electrical codes and that the enclosure is installed by a qualified electrician. Always use the correct rating and type for your specific application.

Electrical work should be performed by a qualified electrician. The device involves high-current connections and protective components; improper installation can create safety risks. Follow local regulations and wiring standards when installing.

If the ELCB trips, first identify and remove the likely fault (e.g., a faulty appliance, moisture intrusion, or a ground fault). Reset the ELCB after ensuring no ongoing fault. If trips persist, inspect connected loads for leakage, verify connections, and consult a qualified electrician to diagnose the cause and check for any insulation or wiring issues.

If you’re not satisfied, review the seller’s return policy on Fepy for eligible items, return windows, and required conditions. Typically, items must be unused and in original packaging to qualify for a return.

Check that your panel accepts a four-pole ELCB in a fixed enclosure configuration and that the busbar, mounting provisions, and terminal sizes match the unit. Confirm the TP (three-phase with neutral) configuration aligns with your distribution setup and that the enclosure mounting dimensions fit your panel space.

The enclosed unit provides mechanical protection, weather resistance (where applicable), and a neater, safer integration into panels. Non-enclosed ELCBs may be smaller or require separate mounting and additional protection, which can affect installation time and protection level.

Yes. For enhanced safety and protection, you can pair this ELCB with compatible MCBs or RCBOs that fit your panel and comply with local electrical standards. Ensure all components are rated for the same system voltage and current and installed by a qualified electrician.

If you’re exploring similar products, you might look at these options on Fepy.com: 1) Schneider Electric 40A TP with Enclosure ELCB 4P A-Type — https://fepy.com/product/schneider-electric-40a-tp-with-enclosure-elcb-4p-a-type 2) Schneider Electric 32A TP with Enclosure ELCB 4P A-Type — https://fepy.com/product/schneider-electric-32a-tp-with-enclosure-elcb-4p-a-type 3) Schneider Electric 63A TP with Enclosure ELCB 4P A-Type — https://fepy.com/product/schneider-electric-63a-tp-with-enclosure-elcb-4p-a-type