SDS Plus Drill Bit

This SDS Plus drill bit is suitable for masonry-related materials such as concrete, brick and breeze blocks, providing accurate holes and dependable performance for repetitive drilling tasks.

SDS Plus bits lock into SDS+ chucks for a secure fit and easy bit changes, are better at handling side loads, and are designed to work with hammer action for faster, more controlled drilling in masonry compared with standard twist bits.

This SDS Plus drill bit is designed to fit SDS+ chucks. It should not be used in non-SDS chucks. If your drill has an SDS+ hammer action chuck, you’re set.

1) Ensure your drill is in hammer/impact mode. 2) Insert the SDS Plus bit into the chuck and push firmly until it seats. 3) Set an appropriate drilling speed and use steady, moderate pressure. 4) Drill with short bursts to avoid overheating and pause to cool the bit if needed. 5) After use, wipe away dust and store in a dry place.

This SDS Plus drill bit is compatible with SDS+ chucks, designed for durable and reliable performance, and intended to provide fast, accurate holes in masonry with a robust, long-lasting construction and a large shank diameter to resist side loads.

Common uses include drilling holes for anchors and fixings in concrete or masonry walls, drilling into brick or breeze blocks for electrical or plumbing runs, and repetitive drilling tasks where depth control is important.

Keep the bit cool by drilling with moderate pressure and allowing short rests to prevent overheating. Clean off dust after use and store the bit in a dry place to prevent corrosion. Use the correct size for your task to minimize wear.

Choose the diameter based on the hole size required by your anchor or plug. For deeper or larger holes, pick a larger diameter bit. Always match the bit size to the fastener’s specifications and use depth stops if precise depths are needed.

On Fepy, you can find several SDS Plus bit sizes to suit different holes. For smaller holes, consider the 5mm variant at https://fepy.com/product/sds-plus-drill-bit-5mm. For mid-range holes, the 6mm version is at https://fepy.com/product/sds-plus-drill-bit-6mm. For larger holes, look at the 8mm at https://fepy.com/product/sds-plus-drill-bit-8mm or the 10mm at https://fepy.com/product/sds-plus-drill-bit-10mm. For even larger diameters, the 12mm option is at https://fepy.com/product/sds-plus-drill-bit-12mm. Each size is optimized for masonry drilling with SDS+ chucks, so choose the one that matches your anchor or plug size.

Yes. The SDS Plus bit offers durable construction, reliable performance, and compatibility with SDS+ chucks, which can translate to good long-term value for frequent masonry drilling tasks. When assessing value, compare durability, expected bit life, and how well the size suits your typical projects across the available options on Fepy.

Wear eye protection and a dust mask, keep hands away from the rotating bit, and ensure the workpiece is secure. Avoid drilling near electrical cables and use appropriate PPE for dust and debris. Work with controlled speed and pressure to minimize kickback and wear on the bit.

If overheating occurs, pause drilling to cool the bit, reduce pressure, and/or switch to lighter drilling bursts. For dull bits, replace with a sharper bit of the same SDS Plus size to maintain clean, precise holes and minimize material damage.