Selex 45A 1 Pole 2 Gang Cooker Switch

Key specs: 45A rating, double‑pole operation, 2‑gang (two switches in one plate), IP44 protection, metal clad finish, ergonomic button design, suitable for controlling ovens and cookers, and compatibility with most cookers/ovens. It is designed for domestic use and meets relevant British and European safety standards.

Unlike a standard light switch, this model handles higher current (45A) and is double‑pole, meaning it can disconnect both live conductors. It also provides two separate switch positions (two gangs) on one plate, specifically for two cooker loads, instead of just a single lighting circuit.

It’s designed to control high‑power cooking appliances such as ovens and hobs up to 45A. If you have two separate cooker loads, the two gangs let you switch them independently from one plate.

General installation steps: 1) Turn off the mains and verify there is no live power. 2) Remove the existing switch and identify the live feed and the load wires. 3) Connect the live feed to the appropriate L/COM terminal(s) and connect each load wire to its corresponding terminal for each gang. 4) Secure the switch to the wall using the flat base and screws. 5) Restore power and test each gang to ensure proper operation. If you’re unsure, consult a qualified electrician.

Yes. It has an IP44 rating, offering protection against dust and splashes, which is suitable for typical domestic kitchen environments. Its metal‑clad construction adds durability, making it a reliable choice for high‑traffic areas where cooking appliances are in use.

Common use cases include separately controlling an oven and a cooker/hob from one wall plate, or managing two distinct high‑current cooking loads in the same kitchen area without needing two separate wall boxes.

If you’re weighing options, you can compare with these Fepy listings: 1) Selex 45A 1 Pole 1 Gang Cooker Switch (URL: https://fepy.com/selex-45a-1-pole-1-gang-cooker-switch/) 2) Selex 45A IP44 2-Gang Cooker Switch (URL: https://fepy.com/selex-45a-ip44-2-gang-cooker-switch/). These provide similar high‑current, cooker‑specific functionality on the same platform.

This Selex switch offers a higher current rating (45A), double‑pole operation, two gangs on a single plate, and a durable metal‑clad finish with IP44 protection. For kitchen environments where two high‑power appliances need reliable, safe isolation, it provides long‑term performance and installation convenience that cheaper, single‑gang, or lower‑rated switches may not offer.

Tips include using the appropriate back box depth for a flush finish, ensuring the live and load wires are correctly identified, tightening screws securely without overtightening, keeping the switch away from direct water contact, and verifying the unit remains firmly mounted with the flat base. If you’re unsure about wiring, hire a licensed electrician.

Periodically check that all screws remain tight, especially around the mounting screws. Keep the switch clean and dry, and inspect for any signs of corrosion or damage to the metal clad finish. If any wiring or terminal connections appear loose or damaged, discontinue use and consult an electrician.

Choose a 2‑gang model when you need to control two separate cooker loads from one plate (for example, an oven and a separate hob). If you only have one high‑current cooker circuit, a single‑gang variant may suffice. For two distinct loads in the same area, the 2‑gang option simplifies wiring and installation.