Sika Anchorfix 2 600ML

It bonds well to concrete, stone, wood, metal, and plastic, making it versatile for structural anchors, mounting, and repairs on varied substrates, including damp or wet conditions.

It uses a two‑component epoxy formula that cures quickly to form a strong, long‑lasting bond capable of withstanding real-world loads and environmental exposure indoors and outdoors.

The product comes in a 600 ml cartridge, is a two‑component epoxy adhesive, non-flammable and non-toxic, and can be applied with a gun, brush, or roller. It stores up to two years and operates effectively from −20°C to +80°C.

Prepare the surfaces, mix the two components according to the packaging guidelines, and apply using a compatible cartridge gun, brush, or roller. Position the substrates, allow curing, and clean up any uncured material with water. After curing, you can sand and paint if needed.

Yes. Sika Anchorfix 2 600ML is suitable for use in damp and even wet conditions, which helps when working on concrete, masonry, or exposed areas.

Cured epoxy bonds typically require mechanical removal. If you’re still working with uncured material, cleanup can be done with water before it cures.

Wear gloves and eye protection, ensure good ventilation, avoid skin contact, and wash off any exposure with soap and water. Keep out of reach of children and dispose of waste according to local regulations.

Use it for bonding metal and plastic components, anchoring bolts and screws, and repairing cracks or holes in concrete and masonry, especially where moisture or outdoor exposure is involved.

On Fepy you’ll also find Sika Anchorfix 3 600ml (https://fepy.com/product/sika-anchorfix-3-600ml) and Sikadur-32 Hi-Mod (https://fepy.com/product/sikadur-32-hi-mod-250ml), both similar high‑strength epoxy options with different mix ratios and cure characteristics to suit specific needs.

It offers a balance of fast curing, broad substrate compatibility, indoor/outdoor use, and ease of application, plus a long shelf life and suitability for damp conditions, making it a versatile all‑round epoxy anchor.

The product is non-flammable and non-toxic. Follow local safety and disposal regulations, ensure proper ventilation during use, and use appropriate PPE to minimize skin and eye exposure.