Rust-Oleum 12oz Specialty Tub and Tile Spray Paint - White

Suitable for ceramic, porcelain, fiberglass, and tile surfaces commonly found in bathrooms, including tubs, sinks, and showers.

Yes, this product is a paint-and-primer-in-one, eliminating the need for a separate primer coat.

Shake the can well before use. Clean and dry the surface, mask off surrounding areas, and apply in light, even coats from about 10–12 inches away. Avoid heavy wet coats to reduce drips. Usually 1–2 coats are sufficient.

The spray dries to the touch in about 15 minutes. Full curing to withstand water exposure takes up to 3 days.

Each 12 oz can covers up to 15 square feet, depending on surface porosity and application technique.

Yes, you can topcoat. You can apply a topcoat within 1 hour of painting or after the surface has fully cured for 3 days.

Yes, the finish is designed to be waterproof and resistant to moisture, making it suitable for tubs, showers, and other high-moisture areas.

This product is available in Gloss White, with other colors offered in the Rust-Oleum Tub & Tile line as color options on Fepy.

Thoroughly clean the surface to remove soap scum and oils, lightly scuff if needed, rinse and dry completely, and mask surrounding areas to protect them from overspray.

Work in a well-ventilated area, wear a respirator or mask and gloves, keep away from heat and open flames, avoid inhaling spray, and store the can upright in a cool, dry place away from children.

Compared with Krylon Tub & Tile Spray Paint on Fepy, Rust-Oleum’s tub-and-tile spray offers a paint-and-primer-in-one formula and quick touch-dry times, with a waterproof, durable finish suitable for bathrooms. Compare here: https://fepy.com/product/krylon-tub-tile-spray-paint-gloss-white