Stanley 10Kg L-Shape SDS-Max Demolition Hammer

The SDS-Max quick-change chuck lets you swap drill bits quickly and securely, speeding up bit changes between tasks without needing additional tools. This is ideal when you need to switch between chiseling and drilling during a demolition job.

Key points include: 10 kg weight with an L-shape body for comfort, SDS-Max chuck for fast bit changes, dual ergonomic handles with rubber grip for better control, variable speed control to match the task, a dust extraction port to reduce debris, and an LED work light to illuminate the area.

The dual handle setup and rubber grip, combined with an advanced damping system, minimize vibration and wrist fatigue. This allows you to work more comfortably for extended periods and maintain better control on tough demolition tasks.

It's designed for heavy-duty masonry work, including concrete and reinforced concrete, brick, tiles, and paving stones. It handles tough demolition tasks where a standard hammer drill would struggle.

Always start with the tool unplugged or not connected to power when changing bits. Insert an SDS-Max bit, connect a compatible dust extractor to the dust port if available, switch to the appropriate speed for the task, and use a two-handed grip with controlled, steady pressure. Let the tool do the work and avoid forcing it.

Regularly clean dust and debris from the body and dust port, check the bit and chuck for wear, keep the air vents clear, inspect the power cord for damage, and store the tool in a dry area. If using a dust extractor, ensure the connection is secure and the vacuum is emptied as needed.

Wear appropriate PPE such as safety glasses, hearing protection, a dust mask or respirator, and sturdy gloves. Secure the workpiece, ensure the area is clear of bystanders, avoid kickback by maintaining a firm two-handed grip, and keep hands and clothing away from moving parts. Use the dust extraction port when possible to reduce airborne dust.

The 12 kg model offers higher impact force for very heavy-duty tasks, which may improve speed on extremely hard materials but adds weight and may be less maneuverable for long jobs. For a direct comparison, you can view the Stanley 12Kg SDS-Max Demolition Hammer STHM12K-B6 on Fepy here: https://fepy.com/product/stanley-sthm12k-b6-sds-max-demolition-hammer-sthm12k-b6

The 8 kg model is lighter and more agile, which can be advantageous for overhead use or less demanding jobs, but it offers less impact energy than the 10 kg version. For a direct comparison, check the Stanley 8Kg SDS-Max Demolition Hammer STHM8K-B4 on Fepy here: https://fepy.com/product/stanley-sthm8k-b4-sds-max-demolition-hammer-sthm8k-b4

Ideal for demolishing old concrete floors, removing sections of brick or blockwork, chipping away plaster or tile beds, breaking up sidewalk sections, and preparing surfaces for new installations. The combination of weight, SDS-Max capability, and dust management helps complete these tasks more efficiently.