Stanley SDH700 13mm 700W 2-Mode Corded Hammer Drill

Key specs include: 700W motor, no-load speed 0–2900 RPM, impact rate 0–49,300 BPM, 13mm keyed chuck, variable speed control, forward and reverse rotation, dual mode operation (rotary and hammer), ergonomic, compact design, side handle, depth gauge, and a lock-on button for continuous operation.

Use the mode selector to switch between rotary (drilling) and hammer (drilling into masonry) modes. For drilling sensitive materials, start with a lower speed using the variable speed control and gradually increase as needed. Release pressure if the drill binds, then resume at a higher speed once the bit is aligned.

You can drill into wood, metal, and masonry. Use wood bits for wood, metal bits for metal, and masonry bits (carbide or tungsten carbide tipped) for brick, concrete, and stone. Ensure the bit shank fits the 13mm keyed chuck and always use appropriate drill bits for the material.

This model includes a side handle and a depth gauge for improved control and accurate drilling depth. Check the packaging to confirm the presence of a chuck key (as it’s a keyed chuck) and ensure all components are in good condition before use.

Wear eye protection, hearing protection, and a dust mask as needed. Secure the workpiece, maintain a firm stance, use the side handle for control, select the correct bit for the material, avoid excessive force, keep the drill perpendicular to the surface, and disconnect from power before changing bits or making adjustments.

Unplug the drill. Use a chuck key to loosen the chuck jaws by turning counterclockwise until they release the bit. Insert the bit shank to the required depth, then tighten the chuck jaws with the chuck key until secure. Verify the bit is firmly fixed before operation.

Yes. For prolonged, continuous drilling or higher demanding tasks, a corded drill like the SDH700 provides constant power without the need for battery changes, and typically maintains consistent performance for masonry and heavy drilling. Cordless models offer portability but may have limited runtime and power depending on battery capacity.

If you’re weighing options, you can compare the SDH700 with these similar Stanley models on Fepy: SDH600 13mm 600W Hammer Drill at https://fepy.com/product/stanley-sdh600-13mm-hammer-drill and SDH800 13mm 800W Hammer Drill at https://fepy.com/product/stanley-sdh800-13mm-hammer-drill. The SDH600 is lighter with lower power, while the SDH800 offers higher power for tougher masonry work. Choose based on your typical materials and usage needs.

Keep the drill clean and dry, periodically inspect the chuck for wear, remove dust from vents after use, and store it in a dry place. Use the depth gauge to avoid overdrilling, and replace worn bits promptly to prevent extra strain on the motor.

For general DIY tasks and light-to-mid masonry work, the SDH700 offers a balanced mix of power, control, and features (700W motor, variable speed, hammer mode, and a 13mm chuck) at a competitive price. If your projects involve frequent heavy-duty masonry drilling or long runtime, compare with higher-wattage corded options or consider a more robust model. Always weigh power, comfort, and cost against your typical job requirements.