Stanley 1-12-333 38mm Carbon Steel Plane Iron

The blade supports two cutting modes: a standard cut and a 90-degree beveled side for beveling rabbets on edges and corners. The design allows you to switch between these positions to achieve different rabbeting and edge-conditioning results without changing blades.

Key specs: width 38 mm (1-1/2 in), carbon steel construction, double-ended design for versatility, precision milled for accurate, clean cuts. It is part of the Stanley 78 Rebate Plane tooling set and is used with the accompanying hardwood wedge and depth-stop system.

To install: loosen the wooden wedge and remove the old blade if present. Place the 1-12-333 blade with the correct orientation so the cutting edge faces the workpiece. Reseat the blade, re-tighten the wedge, and adjust the depth stop to set the desired cut depth. Ensure the blade is seated securely before use.

Keep the edge sharp with regular honing on a fine sharpening stone or diamond stone. After use, clean off debris, dry thoroughly to prevent rust, and lightly oil the blade to protect the steel. Re-check the edge for burrs and re-lap as needed to maintain a clean cut.

Great for creating rabbets, crisp edge details, and precise stop cuts in solid wood. The beveled edge option is useful for bevel rabbets along edges and corners, while the standard edge handles straight cuts and rebates efficiently.

This blade is specifically designed for use with the Stanley 78 Rebate Plane. While it may physically fit other configurations, optimal performance and safety are guaranteed when used with the intended model and its wedge/depth-stop system.

Always wear eye protection and cut-resistant gloves when handling or mounting blades. Clamp your work securely, handle the blade by the edges, and ensure the blade is fully seated and the wedge is properly fixed before starting any machining.

When comparing, consider blade width (38 mm), material (carbon steel), and dual cutting positions. For similar functionality, you can explore these on Fepy.com: Stanley 78 Rebate Plane Iron 38mm Beveled Edge (https://fepy.com/product/stanley-78-rebate-plane-iron-38mm-beveled-edge) and Stanley 78 Rebate Plane Iron Kit (2-Pack) 38mm (https://fepy.com/product/stanley-78-rebate-plane-iron-set-2-pack-38mm). These alternatives offer comparable width and compatibility with the 78 Rebate Plane and provide options for single or multi-blade setups.

If you’re not satisfied with the blade, you can initiate a return per Fepy’s standard return policy. Make sure to keep the packaging and original condition, and follow the returns process outlined by Fepy for blades and replacement parts.

Ensure the blade edge is keen and free of nicks, set the depth-stop accurately for a consistent cut, and use a light touch when making rabbet or edge cuts to avoid tear-out. Regular maintenance and verifying blade alignment before each session will yield the cleanest finishes.