Name: Stanley 1-12-203 240mm Handyman Bench Plane
Brand: Fepy
SKU: 31401-NOS
Price: 229.33 AED
Availability: InStock

Question 1

What is the Stanley Handyman Bench Plane best used for?

Accepted Answer

This 12-inch bench plane is designed for shaping and smoothing timber. It’s ideal for carpenters and joiners who need precise stock removal, surface preparation, and fine finishing on both hardwoods and softwoods. The long sole provides stability for straight, consistent cuts, while the ergonomic handle helps reduce fatigue during extended use.

Question 2

What are the key specifications of the Stanley Handyman Bench Plane?

Accepted Answer

Key specs include a forged and heat-treated steel body for durability, a 12-inch long sole for stability, an adjustable depth stop for consistent cuts, a precision-ground iron blade for a flat cutting surface, an adjustable throat plate for efficient material removal, a protective back-fence to prevent marring, a nickel-plated lever cap for rust resistance, an ergonomic handle for comfort, and a japanned finish for added durability.

Question 3

How do I adjust the cutting depth and throat on this plane?

Accepted Answer

To adjust depth, loosen the quick-access thumbscrew and turn the depth adjustment mechanism to the desired setting, then retighten. The adjustable throat plate lets you control the material removal rate; move the plate to widen or narrow the opening as needed for different textures. After setting, test on scrap wood and fine-tune as necessary.

Question 4

How do I sharpen or replace the iron blade?

Accepted Answer

The plane uses a precision-ground iron blade. To sharpen, remove the blade following the user manual, maintain a sharp edge (typically around 25–30 degrees for the primary bevel, depending on your wood type), and reassemble. If the blade becomes dull or damaged, replace it with a compatible blade. Always recheck the blade alignment and seating before use.

Question 5

What kinds of wood can I plane with this tool?

Accepted Answer

You can use this plane on both softwoods and hardwoods. It’s well-suited for touch-ups, fine adjustments, and achieving a smooth finish on dimensional lumber, panels, and trim. For heavy stock removal, work in stages to maintain blade life and finish quality.

Question 6

What safety precautions should I follow when using this plane?

Accepted Answer

Always wear eye protection and read the user manual before use. Clamp the workpiece securely, keep fingers away from the blade, and maintain a firm grip with both hands. Start with gentle passes and gradually increase depth. Keep the blade sharp to reduce kickback, and store the plane safely when not in use.

Question 7

How does this bench plane compare to the Stanley Handyman Block Plane on Fepy.com?

Accepted Answer

The Stanley Handyman Bench Plane features a longer 12-inch sole for greater stability and straight-tracking, making it better for longer stock and smoothing larger surfaces. The Handyman Block Plane is smaller and more maneuverable, ideal for end-grain work and trim tasks. For a direct comparison, see: Stanley Handyman Block Plane - https://fepy.com/product/stanley-handyman-block-plane

Question 8

How does this bench plane compare to the Stanley No. 4 Bench Plane on Fepy.com?

Accepted Answer

The Stanley No. 4 Bench Plane is a traditional bench plane with a shorter sole and different balance characteristics, often used for general smoothing and fine finishing. The Handyman Bench Plane’s longer sole provides more stability for precise leveling and longer runs. Compare with: Stanley No. 4 Bench Plane - https://fepy.com/product/stanley-no-4-bench-plane

Question 9

How should I install and begin using the plane when unboxing it?

Accepted Answer

Inspect the plane for any transit damage, ensure the blade is properly seated and tightened, and adjust the depth stop and throat plate to a light setting. Mount the plane on a stable work surface, clamp your workpiece, and perform light passes on scrap wood to verify smoothness and depth before proceeding with final stock work.

Question 10

What maintenance does it require to stay accurate and durable?

Accepted Answer

Wipe down and lightly oil moving parts after use to prevent rust. Keep the blade sharp and clean. Periodically check the throat plate alignment and depth stop for proper operation. Store in a dry area, and maintain the japanned finish by wiping away moisture and avoiding harsh chemicals.

Question 11

Is this tool a good value and are there return options if it doesn’t meet my needs?

Accepted Answer

The Stanley Handyman Bench Plane offers durable construction, a long-lasting blade, and features designed for accurate, comfortable planing, making it a solid value for professionals and DIY enthusiasts. If it doesn’t fit your needs, refer to Fepy’s return policy on the product page for details on eligibility and timeframes.

Stanley 1-12-203 240mm Handyman Bench Plane

Features & Benefits

Specification

Attachments

Frequently Asked Questions