Name: Start 75mm UPVC Y Tee - Per Pcs
Brand: Fepy
SKU: 25008-NOS
Price: 7.50 AED
Availability: InStock

Question 1

What is the Star UPVC Y Tee and what does it do?

Accepted Answer

The Star UPVC Y Tee is a Y-shaped pipe fitting made from high grade UPVC. It provides a leakproof connection for two pipes while allowing water or air to pass through and typically enables a higher flow rate compared to some standard fittings.

Question 2

What sizes or connections are available for this UPVC Y Tee?

Accepted Answer

The Y Tee is available in different sizes to meet various piping requirements and is sold per piece. Check the product listing for the exact size options and ensure you match the pipe outer diameter to the fitting size for a proper seal.

Question 3

How does the Y Tee achieve leakproof performance and a higher flow rate?

Accepted Answer

The Y-shaped design reduces turbulence at the junction, promoting smoother flow. When properly joined with UPVC primer and solvent cement, the joints become leakproof. The material itself is resistant to rust and corrosion, contributing to durable, reliable performance even under higher pressure.

Question 4

What are common uses or applications for this UPVC Y Tee?

Accepted Answer

It's suitable for water or air piping systems. Typical uses include building plumbing, irrigation setups, HVAC ducting where branches are needed, and other installations requiring a branch from a main line with a higher flow rate and leakproof joint.

Question 5

How do I install the Star UPVC Y Tee correctly?

Accepted Answer

General steps: 1) Cut pipes square and deburr edges. 2) Dry-fit to confirm alignment. 3) Clean and prime the pipe ends and the fitting’s socket. 4) Apply UPVC solvent cement to the pipe ends and socket. 5) Insert fully and hold for a few seconds to set. 6) Allow the joint to cure per the cement manufacturer’s instructions before pressurizing the system.

Question 6

Is this UPVC Y Tee safe for potable water and long-term use?

Accepted Answer

Yes, UPVC materials are corrosion resistant and widely used in potable water systems when installed with appropriate UPVC primer and cement. The Star UPVC Y Tee is designed for durability and long-lasting performance in clean water or air piping applications.

Question 7

What maintenance or care is recommended for this Y Tee?

Accepted Answer

Perform periodic visual inspections for signs of leaks or cracks, especially at joints. Avoid exposing fittings to harsh chemicals not compatible with UPVC. If a leak is detected, depressurize the system and re-seat or replace the joint using proper cement and primers.

Question 8

How can I determine the right size and fit for my pipes?

Accepted Answer

Measure the outer diameter of the pipes you are joining and compare it to the Y Tee size chart in the product listing. Ensure the fitting size matches your pipe OD for a tight, leakproof seal. If in doubt, consult the product specs or contact support for guidance.

Question 9

How does this UPVC Y Tee compare with other UPVC Y tees available on Fepy?

Accepted Answer

Compared to other UPVC Y tees, this Star Y Tee emphasizes leakproof joints and a higher flow rate due to its optimized Y geometry and high-grade UPVC. For alternative options on Fepy, you can consider similar fittings such as Star UPVC Y Tee 1/2 inch (https://fepy.com/product/star-upvc-y-tee-1-2-inch) and Star UPVC Y Tee 3/4 inch (https://fepy.com/product/star-upvc-y-tee-3-4-inch). Shopping across Fepy will let you compare sizes, price, and fit for your project.

Question 10

What about solvent cement and primers—are they required for installation?

Accepted Answer

Yes. UPVC solvent cement and primer rated for UPVC are typically required to achieve a secure, leakproof joint. Follow the cement manufacturer’s curing times and the fitting manufacturer's guidelines for best results.

Question 11

If I’m buying multiple units, what should I consider for value and planning?

Accepted Answer

Since it is sold per piece, plan for enough fittings to accommodate all piping branches in your project. Consider the pipe sizes you’ll use, the number of connections needed, and any future expansion to ensure you have the correct quantity and sizes on hand. Durable UPVC fittings can offer long-term reliability and cost efficiency by reducing leaks and replacements.

Question 12

What is the expected performance advantage of using a Y Tee over a standard Tee?

Accepted Answer

A Y Tee can provide smoother flow through the branch with reduced turbulence compared to a standard tee, which often translates to improved flow efficiency and potentially better overall system performance when branching off a main line.

Start 75mm UPVC Y Tee - Per Pcs

Features & Benefits

Specification

Attachments

Frequently Asked Questions