Thomsun PPR Elbow, 40mm x 45°, Angled Connector

The Thomsun PPR Elbow is a plumbing fitting used to join two PPR pipes at a 45-degree angle. Made from high-grade polypropylene (PPR), it’s designed for durability and reliable connections in hot and cold water systems. The model shown is a 25 mm size with a 45° angle and is rated up to 95°C.

If the product doesn’t meet your needs, you can review Fepy’s return policy on the product page or the store's returns section. Availability and terms may vary by region and purchase date.

Pair this elbow with compatible 25 mm PPR piping and matching connectors. Depending on your system, you might also need PPR solvent cement, primer, pipe inserts, or threaded adapters as appropriate. Always follow the product’s installation guide for compatibility.

Compared with other PPR elbows on Fepy, this 25 mm x 45° Thomsun elbow emphasizes durability, corrosion resistance, and a straightforward installation. When comparing, consider size, angle, material quality, temperature rating, and the type of connection (threaded vs solvent-weld) to choose the best fit for your system.

Routine checks for leaks at joints, ensuring fittings are properly seated, and using compatible solvents/c cement as required. Since PPR is corrosion-resistant and durable, routine inspection is usually sufficient to maintain performance.

Measure the pipe diameter you’re connecting (e.g., 25 mm) and select the matching PPR elbow size (25 mm) with the desired angle (45° in this case). If you’re switching from another angle or size, ensure the fittings you choose are compatible with your existing piping and connectors.

The elbow is rated up to 95°C, and the PPR material provides high impact strength and corrosion resistance, contributing to a long service life in water supply applications.

This elbow is suitable for hot and cold water distribution in residential, commercial, and light industrial piping systems. It’s ideal for branching a PPR line at a 45-degree angle to fit your layout.

For this elbow, ensure you have compatible PPR piping. Clean the pipe ends, apply the appropriate connector method (threaded connection as described), seat the elbow firmly onto the pipes, and tighten securely to prevent leaks. If the product requires solvent cement or a specific installation method, follow the included instructions or product page guidelines.

Thomsun PPR Elbows are available in multiple sizes (e.g., 20 mm, 25 mm, 32 mm) and angles (commonly 45° and 90°). The 25 mm x 45° variant is one of the typical offerings. For specifics, check the Thomsun PPR Elbow listings in the Thomsun PPR fittings category on Fepy.

Key specs include: 25 mm nominal size, 45-degree elbow angle, high-grade PPR material for durability and corrosion resistance, easy-to-install threaded connection, high impact strength, and a maximum operating temperature of 95°C.

The Thomsun PPR Elbow is a plumbing fitting used to join two PPR pipes at a 45-degree angle. Made from high-grade polypropylene (PPR), it’s designed for durability and reliable connections in hot and cold water systems. The model shown is a 25 mm size with a 45° angle and is rated up to 95°C.

If the product doesn’t meet your needs, you can review Fepy’s return policy on the product page or the store's returns section. Availability and terms may vary by region and purchase date.

Pair this elbow with compatible 25 mm PPR piping and matching connectors. Depending on your system, you might also need PPR solvent cement, primer, pipe inserts, or threaded adapters as appropriate. Always follow the product’s installation guide for compatibility.

Compared with other PPR elbows on Fepy, this 25 mm x 45° Thomsun elbow emphasizes durability, corrosion resistance, and a straightforward installation. When comparing, consider size, angle, material quality, temperature rating, and the type of connection (threaded vs solvent-weld) to choose the best fit for your system.