Thomsun PN-16 PPR Pipe, 40mm x 4m, High-Pressure Plumbing Pipe for Hot & Cold Water

Size: 40 mm diameter; Length: 4 meters; Material: PPR-C; Pressure rating: PN-16 (up to 16 bar); Suitable for hot and cold water applications; Resistant to corrosion, abrasion, and many chemicals; Connects with compression couplings for simple installation.

Yes. The pipe is designed for both hot and cold water systems and is versatile enough for industrial and agricultural uses. Its PN-16 rating supports higher-pressure scenarios typical in plumbing installations, while its PPR-C material provides durable performance in various temperatures and environments.

Connections are commonly made with compression couplings designed for PPR systems. The pipe can also be joined to compatible PPR fittings to form secure, leak-resistant joints. Always use fittings specifically rated for PPR-C to ensure a proper seal and long service life.

Typical steps: cut the pipe square with a sharp pipe cutter, deburr the edges, dry-fit to ensure proper alignment, then join using approved compression couplings or compatible fittings. Ensure clean ends, avoid excessive bending, and support the pipe to prevent sagging. Follow local plumbing practices for spacing and support.

PPR-C is known for high durability, good temperature and pressure tolerance, and strong chemical resistance. It’s corrosion-resistant, lightweight, and easier to install than many metal pipes. These factors contribute to a longer service life and lower maintenance in many piping applications.

Operate within the PN-16 pressure limit (up to 16 bar) and suitable temperature range for your system. Use only compatible fittings and joining methods, avoid exposure to incompatible chemicals, and adhere to local plumbing codes and standards. Proper handling and supported installation help prevent leaks and failures.

PN-16 indicates a maximum working pressure up to 16 bar, suitable for most residential and many commercial water systems. If your system experiences higher pressures or future pressure spikes, consider pipes with a higher PN rating. Always verify your system’s operating pressure before selecting pipe size and rating.

This listing shows a 40 mm x 4 m PN-16 PPR pipe. For other project needs, you may find additional diameters and lengths in the PPR pipe category on Fepy. To select, match the pipe diameter to your fittings and plan for the required run length plus some extra for joins and allowances.

If you’re not satisfied with the product, you can typically initiate a return according to Fepy’s standard return policy for unused items in saleable condition. Please consult the site’s return terms for eligibility and timeframes.

If you’re considering alternatives, you can compare different diameters or brands of PPR pipes on Fepy. For example, you might look at similar options such as Thomsun 32mm x 4m PN-16 PPR Pipe, Thomsun 50mm x 4m PN-16 PPR Pipe, or Qest 40mm x 4m PN-16 PPR Pipe to find the right balance of size, price, and availability: - Thomsun 32mm x 4m PN-16 PPR Pipe: https://fepy.com/product/thomsun-32mm-x-4m-pn-16-ppr-pipe - Thomsun 50mm x 4m PN-16 PPR Pipe: https://fepy.com/product/thomsun-50mm-x-4m-pn-16-ppr-pipe - Qest 40mm x 4m PN-16 PPR Pipe: https://fepy.com/product/qest-40mm-x-4m-pn-16-ppr-pipe

You'll typically need compatible PPR fittings (tees, elbows, couplings), compression couplings, end caps or stoppers, a pipe cutter, deburring tool, and possibly clamps or supports. Depending on the installation, you may also need thermal insulation or protective sleeves for outdoor runs.