Thomsun PN-20 PPR Pipe, 63mm x 4m, High-Pressure Plumbing Pipe for Hot & Cold Water

Material: polypropylene random copolymer (PPR-C). Diameter: 63 mm. Length: 4 m. Pressure rating: PN-20. It is designed to withstand chemical exposure and abrasion, with suitability for hot and cold water applications when paired with compatible fittings.

PN-20 indicates a nominal pressure rating of up to about 20 bar, making it appropriate for higher-pressure water supply lines in both domestic and light commercial installations.

Yes. PPR-C pipes are commonly used for both hot and cold water distribution. Ensure you select compatible 63 mm PN-20 fittings and follow proper joining methods for hot-water use.

Typical steps: plan the run, cut the pipe square with a pipe cutter, deburr the cut ends, dry-fit with 63 mm PN-20 fittings, and join using the appropriate method (fusion welding or compatible crimp/fitment fittings). After joining, pressurize the system and check for leaks.

Use compatible 63 mm PPR fittings (couplings, elbows, tees, adapters) rated for PN-20. Choose joining methods appropriate for your system (fusion welding or approved mechanical fittings) to ensure leak-free joints.

Here are a few reference comparisons available on Fepy.com: - Compare with Thomsun 63mm x 4m PN-16 PPR Pipe: https://fepy.com/product/thomsun-63mm-x-4m-pn16-ppr-pipe Note: PN-16 has a lower pressure rating than PN-20; use it for lower-pressure scenarios. - Compare with Thomsun 32mm x 4m PN-20 PPR Pipe: https://fepy.com/product/thomsun-32mm-x-4m-pn20-ppr-pipe Note: Smaller diameter reduces flow capacity; use for branch lines. - Compare with Thomsun 75mm x 4m PN-20 PPR Pipe: https://fepy.com/product/thomsun-75mm-x-4m-pn20-ppr-pipe Note: Larger diameter offers higher flow; ensure system fittings are compatible.

It's suitable for potable water distribution in both residential and commercial settings, including mains, branch lines, and service connections where a 63 mm diameter and PN-20 rating meet your system requirements.

PPR-C pipes are widely used for potable water systems due to their chemical resistance and inert material. Use with approved fittings and follow local codes and standards to ensure compliance in your area.

The pipe is made from high-quality PPR-C material, offering corrosion and chemical resistance with a long service life when properly installed. Durability is enhanced by correct fittings and pressure-rated use.

Benefits include durable, corrosion-resistant construction, suitability for hot and cold water, a reliable PN-20 pressure rating, and ease of installation with compatible fittings—leading to long-term cost savings and lower maintenance.

Periodically inspect joints for leaks, check exposed runs for any signs of wear or damage, and ensure all connections remain secure. If you notice a leak, stop the system, depressurize, and re-check the affected joint with proper fittings.