Philips LED Batten Housing 220-240V TMS012C 1200mm 4FT (1× TLED L1200 G2 GM)

The fixture is designed to accommodate two T8 LED tubes. DE wiring means the electrical connections are made at both ends of the tubes, allowing easier wiring for certain installations and enabling compatibility with single-ended or double-ended T8 tubes depending on your chosen configuration.

Key specs include a 1200 mm (4 ft) length, capacity for two T8 LED tubes, a robust durable construction, mercury-free design, wide beam for uniform illumination, and compatibility with standard fixtures. Exact lumen output and CCT depend on the T8 tubes you install.

Ideal for offices, classrooms, retail spaces, and light-industrial environments where bright, even illumination is needed and a slim, low-profile fixture is preferred.

General steps: (1) switch off power at the breaker, (2) mount the batten to a ceiling or wall using the provided hardware, (3) connect the DE wiring to your supply following local electrical codes, (4) insert two compatible T8 LED tubes, (5) restore power and test for proper illumination.

The fixture is designed for surface mounting and can be suspended where appropriate, using standard mounting methods for 4-foot battens and compatible support hardware.

Yes. It uses mercury-free LED technology and is designed to meet common electrical safety standards for indoor lighting. Always follow local electrical codes and installer guidelines during installation.

Compared to other 4 ft Philips LED battens on Fepy, you’ll see differences mainly in tube configuration (single vs. dual tube), wiring (DE vs. SE), and lumen/color options based on the tubes you choose. For quick reference, you can review related models on Fepy here: https://fepy.com/product/philips-tms012c-de-1200mm-g2-gm-4ft-double-led-t8-batten and alternatives such as: https://fepy.com/product/philips-tms010c-de-1200mm-g2-gm-4ft-1x-tled-batten and https://fepy.com/product/philips-tms015c-de-1200mm-g2-gm-4ft-2x-tled-batten

Lumen output and color temperature depend on the two T8 LED tubes you install. The batten provides the housing and wiring; choose tubes that meet your desired brightness (lumens) and color temperature (e.g., warm, neutral, or cool white) to achieve the lighting you want in your space.

Periodically inspect the wiring connections, clean the diffuser or cover if present, and replace the T8 tubes when brightness drops or color shifts occur. Since LED life and brightness depend on usage and tube quality, follow the tube manufacturer’s replacement guidelines.

This batten is designed to accommodate two T8 LED tubes. Verify compatibility by checking the tube type (T8), length (4 ft), and DE/SE wiring requirements as specified in your installation guide and by the tube manufacturer. Always use tubes that are listed as compatible with DE-configuration fixtures to ensure proper operation and safety.