Total TAC15121411 14 X 250MM Flat SDS Plus Chisel Bit

The bit is specified as 14 inches long with a 250 mm flat profile. It is designed for use with the TAC15121411 SDS Plus rotary hammer and is compatible with standard SDS Plus hammer systems.

The chisel bit is manufactured from high‑quality tool steel designed for strength and durability under tough jobsite conditions. This construction helps resist wear, maintain sharpness longer, and withstand repeated hammering during demolition work.

1) power off the tool and remove the current bit if needed. 2) insert the TAC15121411 SDS Plus chisel bit fully into the hammer’s chuck. 3) securely tighten the chuck to lock the bit in place. 4) set the hammer to appropriate impact rate for demolition or chiseling. 5) apply steady, controlled pressure without forcing the bit. 6) periodically pause to cool the bit and prevent overheating.

Flat chisels are ideal for creating clean, flat surfaces, removing mortar, tile backing, and breaking large, flat sections of material. Use pointed chisels for more aggressive penetration or shaping in corners and gaps.

Wear safety glasses or a face shield, hearing protection, and gloves. Ensure the work area is clear of bystanders, secure the workpiece, and follow the hammer’s safety guidelines. Avoid overheating the bit, don’t twist or bind the bit, and always keep hands and clothing away from the rotating head.

Inspect the bit for cracks, chips, or severe wear before use. Wipe off dust and debris after use, keep the bit dry to prevent rust, and store it in a dry, organized toolbox or rack. If you notice excessive wear or damage, replace the bit to avoid tool damage or safety risks.

Yes. The flat SDS Plus chisel design is suitable for removing tile backing, mortar, and other similar materials when used with the TAC15121411 rotary hammer, allowing for controlled and efficient material removal.

If you’re not satisfied, you can generally request a return within the store’s specified window as long as the item is in unused condition and in original packaging. Contact support or follow the returns process on Fepy for eligibility and instructions.

For similar flat SDS Plus chisels on Fepy, you can consider alternatives such as Total TAC15121412 14 x 250mm Flat SDS Plus Chisel Bit and Total TAC15121413 14 x 250mm Flat SDS Plus Chisel Bit. Both are designed for comparable demolition and chiseling tasks and share compatibility with SDS Plus rotary hammers. Their slight design differences may affect tip geometry and contact area, influencing material removal efficiency in specific materials (concrete, brick, tile).

The bit is designed for professional demolition and chiseling tasks and is compatible with standard SDS Plus rotary hammers. It will work with other SDS Plus hammers that use a compatible SDS Plus shank, but it is not compatible with SDS Max tools. Always verify your hammer’s compatibility before use.