Total TAC2111801 7Inch X 22MM Diamond Disc

This disc is designed for cutting tiles, marble, and granite. It can handle other similar hard tile or stone materials, depending on your tool and feed rate.

Key specs: 7-inch diameter, 22mm thickness, diamond grit coating for precise cuts, and compatibility with most power tools. It is built for durability and long-lasting performance in demanding cutting tasks.

Power off the tool before changing discs. Align the disc with the tool’s arbor, secure it with the appropriate nut, and tighten firmly. Ensure the disc is compatible with your tool’s arbor size and that the guard is in place before use.

This disc is compatible with most power tools that accept standard 7-inch diamond discs, including angle grinders and tile or masonry saws. Always verify arbor size and RPM limits on your tool.

Mark your cut line clearly, use a straight edge or guide, maintain a steady feed rate, and use adequate cooling (water for wet cutting) to reduce heat and dust. Let the disc do the work without forcing it.

Always wear eye protection, hearing protection, gloves, and a dust mask or respirator as appropriate. Ensure guards are in place, keep the work area clear, and avoid kickback by maintaining a steady, controlled cut.

After use, clean off debris and inspect the diamond surface for wear or damage. Store in a dry, flat area to prevent warping. Replace the disc when the cutting edge becomes worn or damaged.

Ideal for bathroom or kitchen renovations, cutting porcelain or ceramic tiles, marble countertops, and granite slabs. It’s suitable for precise tile installation and stone cutting tasks.

For alternatives on Fepy, you can compare with models like TAC2111802 7Inch Diamond Disc at https://fepy.com/product/tac2111802-7inch-diamond-disc and TAC2111701 7Inch Diamond Disc at https://fepy.com/product/tac2111701-7inch-diamond-disc. Both offer similar size and capability with potential differences in grit, bonding, and life. Review each page to choose the best fit for your materials and tool.

The TAC2111801 uses durable diamond grit designed for long-lasting, precise cuts on tile and stone. It delivers consistent performance, better edge quality, and compatibility with a wide range of power tools, which can lead to lower replacement frequency and more reliable results over time.