Total TAC52644D 150MM X 19MM X 0.9MM Reciprocating Saw Blade For Wood

The blade measures 150mm in length, 19mm in width, and has a thickness of 0.9mm.

It's suitable for a variety of wood types, including softwood, hardwood, plywood, and other common wooden materials. It’s a general-purpose wood blade intended for versatile use.

The TAC52644D is designed to fit most standard reciprocating saws. Always confirm your saw uses a common blade shank to ensure compatibility.

Disconnect power, open the blade clamp, insert the blade so the teeth point toward the cutting direction, and securely clamp it in place. Make sure the blade is fully seated before resuming work.

The 19mm blade width supports both straight and curved cuts in wood, making it suitable for trimming, bevels, and contour work. It’s also capable of some plunge cuts when used carefully.

Use the appropriate feed rate to avoid stalling, avoid forcing the blade, and cut at a steady speed. Keep the blade cool, avoid cutting nails or other hard contaminants, and periodically inspect for wear or chipping.

Wear eye protection and gloves, secure your workpiece, clamp the work surface, and keep hands away from the blade. Disconnect power before changing blades and follow your tool’s safety guidelines.

For similar wood-cutting performance, you can compare with these other Fepy blades: TAC52644E (150mm x 19mm x 1.0mm) which offers a slightly thicker cut for durability, TAC52642D (150mm x 16mm x 0.8mm) which is a narrower blade for tighter curves, and TAC52646D (125mm x 19mm x 0.9mm) which is a shorter option with similar thickness. See these options here: https://fepy.com/products/total-tac52644e-150mm-19mm-1-0mm-reciprocating-saw-blade-wood, https://fepy.com/products/total-tac52642d-150mm-16mm-0-8mm-reciprocating-saw-blade-wood, https://fepy.com/products/total-tac52646d-125mm-19mm-0-9mm-reciprocating-saw-blade-wood

Choose this blade when you need a solid balance of rigidity and maneuverability for general wood cutting. If you’re doing very tight curves or need a blade with more flexibility, a narrower blade might be preferable; for heavy-duty, high-durability cuts in tougher wood, a thicker blade could be better.

It’s well-suited for framing cuts, trimming and notching, cabinet making, shelf installation, and other woodworking tasks where clean, efficient wood cuts are needed without excessive blade flex.