logo

Hello, Sign In

Trade Account

UNI-T

UNI-T Clamp Earth Resistance Tester 1800 Ohm 50A UT 278C

In Stock
Limited stock — only 6 left
2,614.29
EXCL.VAT
Incl. 5% VAT AED 2745.00

FREE Returns

Sign in & get up to 10% off your first order. Use code WELCOME10.

Upgrade to Fepy Pro and get up to 10% off all orders.

    Key Features

    • UT278C earth clamp tester for professional testing.
    • Measures current without breaking circuits.
    • Current range supports checks up to 50A.
    • 1800 Ohm resistance range aids diagnostics.
    • Useful for electricians and maintenance teams.
    • Compact design suits tool bags and kits.

Features & Benefits

Application

Designed for non-invasive current measurement, panel inspection, motor checks, HVAC service, and electrical maintenance, with UNI-T UT 278C Clamp Meters configuration.

Measurement Range

Clamp earth resistance tester.

Key Ratings

Earth resistance measurement up to 1800Ω.

Technical Range

AC current measurement up to 50A.

Functions

Ground-pile clamp testing design.

Technical Details

Professional grounding-system maintenance use.

Key Specifications

Custom Stock Status

2 - 3 Days

Quantity Unit

PCS

Best Seller

No

Model No

UT 278C

Brands

UNI-T

Item Type

Digital Clamp Meter

Country Of Origin

China

Frequently Asked Questions

The UNI-T UT 278C is a clamp earth resistance tester that measures earth resistance up to 1800Ω and AC current up to 50A. Its clamp design allows testing without disconnecting the ground conductor, which suits grounding-system maintenance, panel inspection, motor checks and HVAC service by professional electrical and facility teams.

The UT 278C measures earth resistance up to 1800Ω and AC current up to 50A. It is a clamp-style tester designed for ground-pile clamp testing in professional grounding-system maintenance. For details such as accuracy, resolution, jaw opening, power source and safety category, refer to the product manual or data sheet.

It suits professional grounding-system maintenance, including checks on electrical panels, motors, HVAC equipment, building earthing and facility installations where disconnecting the earth conductor would be disruptive. The AC current range adds non-invasive current checks. It is mainly a trade instrument, but a qualified electrician may use it on a villa's earthing system.

The clamp applies a signal to the grounding loop through its jaws and measures the response to determine loop resistance, so the ground conductor does not need to be disconnected. This works when the earth path forms a loop with other grounding paths. It will not give a useful reading for a single isolated electrode, so check the manual.

Install the batteries as the manual describes, switch on the tester and choose the earth resistance mode. Open the jaws, close them fully around the ground conductor, ensuring the faces are clean and meet properly, and wait for the reading to settle. Follow the manual for any self-check, calibration or recommended test procedure.

Clean the jaw faces regularly, since dirt and dust between them can affect readings, and wipe the body with a dry cloth. Avoid dropping the instrument or leaving it in a hot vehicle, as UAE summer temperatures can damage electronics. Store it in a case in a dry place and remove the batteries if it will not be used for a while.

The UT 278C is a handheld instrument that suits maintenance and inspection work. In UAE conditions, keep dust out of the jaws, avoid leaving it in direct sun or a hot car, and handle it carefully in humid or coastal environments. Soil moisture and seasonal conditions can influence earthing readings, so follow your inspection procedure when recording results.

Electrical contractors, inspectors and facility engineers use clamp testers for periodic grounding checks and fault-finding without shutting down or disconnecting earth conductors, which saves time and minimises disruption. Readings are recorded for maintenance files and compared against project specifications and applicable requirements. The instrument should be used by competent persons.

The UT 278C is a professional instrument, so most households will not need one. A qualified electrician may use it to check earthing when inspecting a villa, adding circuits or investigating electrical concerns. If you suspect an earthing problem, ask a competent person to test it rather than attempting the measurement yourself.

Only competent persons should use the tester on electrical installations. Stay within its 50A current range and the limits given in the manual, and do not use it if the case or jaws are cracked or damaged. Work involving live mains must be done by a qualified person following applicable UAE requirements and site safety rules.

Ratings & Reviews

See what customers are saying

No reviews yet

Be the first to review this product after purchase.

No reviews yet. Reviews appear here once customers review their orders.

More from UNI-T

Bestsellers from Electrical Testers & Tools

Manufacturer Warranty

Official warranty coverage from brand manufacturers

99% Claims resolved

Cash on Delivery

Choose Cash or Card as your payment

AED 100+ Min. order value

Secure Payment

100% secure payment processing

256-bit SSL encryption

Free Delivery

On all orders above AED 200 across UAE

Same Day In Abu Dhabi & Dubai

100% Genuine

Authentic products guaranteed

Authorized Distributor

Free Returns

7-day easy return policy

No questions Asked policy