logo

Hello, Sign In

Trade Account

UNI-T

UNI-T Wire Tester RJ45/RJ11/BNC UT 681C

Out Of Stock
69.00
EXCL.VAT
Incl. 5% VAT AED 72.45

FREE Returns

Sign in & get up to 10% off your first order. Use code WELCOME10.

Upgrade to Fepy Pro and get up to 10% off all orders.

    Key Features

    • UT681C cable tester for professional testing.
    • Traces cables for faster fault finding.
    • RJ45 and RJ11 ports support cable checks.
    • BNC support helps test coaxial cables.
    • Useful for electricians and maintenance teams.
    • Compact design suits tool bags and kits.

Features & Benefits

Application

Designed for network cabling, telecom, low-voltage installation, cable tracing, continuity checks, and fault finding, with UNI-T UT 681C Wire Tracers configuration.

Functions

RJ45/RJ11/BNC cable tester.

Product Overview

Supports Ethernet and coaxial/BNC cable testing.

Technical Details

Single-key operation.

Key Ratings

Manual and auto shutdown.

Measurement Range

9V battery power with low-battery detection.

Key Specifications

Custom Stock Status

Out Of Stock

Quantity Unit

PCS

Best Seller

No

Model No

UT 681C

Brands

UNI-T

Item Type

Wire Tracer

Country Of Origin

China

Frequently Asked Questions

The UNI-T UT 681C is a handheld wire tester for RJ45, RJ11 and BNC cabling. It supports Ethernet and coaxial testing, so installers use it for continuity checks, cable tracing and fault finding on network, telecom and low-voltage runs. It is a quick way to confirm that a patch lead or installed cable is wired correctly before equipment is connected.

The tester is operated with a single key, which keeps use simple on site. It can be switched off manually and also shuts down automatically to save battery. Power comes from a 9V battery, and the unit detects when the battery is running low so you know when to replace it. Supported cable types are RJ45, RJ11 and BNC coaxial.

It suits structured network cabling, telephone line installation, low-voltage wiring and coaxial runs that use BNC connectors, such as CCTV cameras. Typical jobs are checking continuity, finding broken or miswired cables and confirming new patch leads before handover. Home users can test Ethernet cables, telephone leads and old coaxial runs when setting up a home network or tidying cabling.

You plug the cable into the port that matches its connector, RJ45, RJ11 or BNC, and press the single key to run the check. The tester then gives a continuity result for that cable. Because the exact indicator patterns and the way the far end is connected can differ between models, follow the manual for how to read each result.

Open the battery compartment, fit a 9V battery with the correct polarity and close it securely. Make sure the cable you are testing is disconnected from any live equipment, plug it into the matching port, and press the key to start the test. Read the result according to the manual, then switch the unit off manually or let auto shutdown do it.

Wipe the casing with a dry or lightly damp cloth and keep the ports free of dust and debris. Remove the 9V battery if the tester will not be used for a while to avoid leakage, and replace it when low-battery detection signals it is weak. Store it in a dry place away from direct sun, and keep it in a bag or case in dusty vehicles.

Yes, a compact battery-powered tester is practical for UAE ceiling voids, risers, comms rooms and villa fit-outs where mains power is not handy. Heat and dust are the main concerns, so do not leave it on a dashboard or in direct sun, and keep the ports covered between jobs. Auto shutdown helps preserve the battery during long days on site.

Cabling contractors and low-voltage technicians use it to check cable runs and patch leads during installation, to trace faults during snagging and to confirm CCTV coax connections. Single-key operation keeps checks quick. It is a basic continuity and fault-finding tool, so where a project specification calls for certified performance reports, use suitable certification equipment as well.

Yes. At home it helps with checking Ethernet cables run through walls, telephone leads, and coax cables used for CCTV cameras. It is useful when a connection drops and you want to know whether the cable or the device is at fault. Keeping a spare 9V battery on hand and following the manual is all that is needed to get started.

Disconnect the cable from all equipment and make sure it carries no power before connecting the tester. It is designed for low-voltage data, telephone and coaxial cables, so never connect it to mains wiring or any live circuit. Replace the 9V battery carefully, keep the tester dry, and stop using it if the casing or ports are damaged.

Ratings & Reviews

See what customers are saying

No reviews yet

Be the first to review this product after purchase.

No reviews yet. Reviews appear here once customers review their orders.

More from UNI-T

Bestsellers from Electrical Testers & Tools

Manufacturer Warranty

Official warranty coverage from brand manufacturers

99% Claims resolved

Cash on Delivery

Choose Cash or Card as your payment

AED 100+ Min. order value

Secure Payment

100% secure payment processing

256-bit SSL encryption

Free Delivery

On all orders above AED 200 across UAE

Same Day In Abu Dhabi & Dubai

100% Genuine

Authentic products guaranteed

Authorized Distributor

Free Returns

7-day easy return policy

No questions Asked policy