Name: Atlas PVC Reducer Bush, 160mm x 110mm, Heavy-Duty
Brand: Fepy
SKU: 24858-NOS
Price: 11.25 AED
Availability: InStock

Question 1

What is the Atlas PVC Reducer Bush 160mm x 110mm used for?

Accepted Answer

The reducer bush provides a smooth, leak-resistant transition from a 160 mm pipe to a 110 mm pipe. It's ideal for high-capacity water transfer, large-scale irrigation, and industrial plumbing where a robust, long-lasting connector is required.

Question 2

What are the key specifications and materials?

Accepted Answer

Specs: reducer size 160 mm to 110 mm; heavy-duty PVC construction; smooth inner finish to minimize friction; high pressure tolerance for industrial use; corrosion resistant for water and chemical systems; accurate fit for a seamless pipe transition; suitable for industrial plumbing and large-scale irrigation.

Question 3

How does the reducer bush connect to pipes and fit into a system?

Accepted Answer

The reducer bush is installed between two PVC pipe ends. For most installations you will apply PVC primer and cement to both ends, align the 160 mm and 110 mm ends with the respective pipes, and insert the bush so the joints are fully seated. Allow the joints to cure per the cement manufacturer's directions and perform a leak check.

Question 4

Can this reducer be used in high-pressure systems?

Accepted Answer

Yes, it is designed for heavy-duty, high-pressure industrial use. Always ensure the entire system, including pipes, fittings, and cement joints, is rated for the operating pressure and follow best practices for install and testing.

Question 5

How do I install the Atlas PVC Reducer Bush 160mm x 110mm?

Accepted Answer

Steps: 1) cut and deburr the pipe ends; 2) clean the ends and apply PVC primer; 3) apply PVC cement to the 160 mm and 110 mm ends; 4) slide the reducer onto the larger pipe and seat it; 5) quickly connect the smaller pipe end and assemble; 6) hold the joints steady until the cement cures; 7) test for leaks under pressure.

Question 6

What safety precautions should I take when using PVC reducers?

Accepted Answer

Wear eye protection and gloves when handling solvents and cement. Work in a well-ventilated area. Ensure pipe ends are clean and free of burrs to prevent fitting damage. Verify chemical compatibility with the PVC material and any fluids in the system, and avoid exposing PVC to high heat or incompatible chemicals.

Question 7

What are typical use cases for this reducer bush?

Accepted Answer

Common uses include industrial plumbing networks, large-scale irrigation systems, municipal water transfer lines, and chemical-processing setups where a durable, leak-resistant 160 mm to 110 mm transition is needed.

Question 8

What other comparable options are available on Fepy and what are their URLs?

Accepted Answer

Comparable options on Fepy include:
- Atlas PVC Reducer Bush, 180mm x 110mm, Heavy-Duty: https://fepy.com/product/atlas-pvc-reducer-bush-180mm-110mm-heavy-duty
- Atlas PVC Reducer Bush, 160mm x 90mm, Heavy-Duty: https://fepy.com/product/atlas-pvc-reducer-bush-160mm-90mm-heavy-duty
- Atlas PVC Reducer Bush, 200mm x 150mm, Heavy-Duty: https://fepy.com/product/atlas-pvc-reducer-bush-200mm-150mm-heavy-duty
- Atlas PVC Reducer Bush, 140mm x 100mm, Heavy-Duty: https://fepy.com/product/atlas-pvc-reducer-bush-140mm-100mm-heavy-duty

Question 9

How do I choose the right reducer size for my pipeline?

Accepted Answer

Determine the pipe diameters on either side of the section you’re connecting. A reducer bush should match the larger pipe on one end and the smaller pipe on the other (in this product’s case, 160 mm to 110 mm). Also consider flow requirements and system pressure; if in doubt, consult a piping engineer or compare with similar fittings on Fepy.

Question 10

Can I install multiple reducers in series if my system requires several size changes?

Accepted Answer

Yes, you can chain reducers in series to step down across multiple sizes, provided each joint is properly cemented and the alignment is maintained. Check that each subsequent reducer’s ends match the pipe sizes and your system’s pressure rating remains within limits.

Question 11

Is this product a good value compared with other fittings on Fepy?

Accepted Answer

This reducer bush is designed for heavy-duty, long-term performance with a smooth inner finish and corrosion resistance, which helps reduce leaks and friction losses over time. If you compare it with other heavy-duty PVC reducers on Fepy, consider material quality, fit precision, and the expected service life in your application.

Question 12

What is the returns process if I need to return this item?

Accepted Answer

If you need to return this item, start by contacting Fepy support to authorize a return and obtain an RMA. Ensure the item is unused and in original packaging where possible, and follow the provided return instructions to receive a refund or exchange.

Atlas PVC Reducer Bush, 160mm x 110mm, Heavy-Duty

Features & Benefits

Specification

Attachments

Frequently Asked Questions