2" UPVC Socket - Per Pcs

This listing is for the UPVC socket per piece. It does not typically include cement or primers, which are sold separately. You’ll need to purchase the appropriate UPVC solvent cement and primer for a secure installation.

Use a coupling for straight-through connections, an elbow when the pipe needs to change direction, and a tee to create a branch or three-way connection. Match the option to the required pipe diameter and ensure compatibility with your UPVC piping.

If you need a different configuration, consider these alternatives on Fepy.com: - UPVC Elbow 90 Degree (for changing direction): https://fepy.com/product/upvc-elbow-90-degree-per-pcs - UPVC Tee (for branching): https://fepy.com/product/upvc-tee-per-pcs - UPVC Coupling (for straight joins): https://fepy.com/product/upvc-coupling-per-pcs Each option is designed for a specific piping need.

Buying per piece lets you replace only the length you need, offering flexibility and cost-effectiveness. For returns, refer to Fepy’s return policy on the product page for guidance on exchanges or refunds.

Handle fittings with care to avoid cracks. Use proper PPE when cutting and cleaning pipes. Follow manufacturer recommendations for primer and cement usage and ensure adequate ventilation when applying solvents.

Make sure your pipe diameter matches the socket size and that you’re using compatible UPVC piping. If in doubt, measure the pipe OD and consult the product size options listed on the page.

It’s suitable for irrigation and general plumbing, including bathrooms and kitchens, as well as outdoor piping where UPVC fits standard pipe sizes.

Yes. UPVC sockets resist corrosion and rust and are designed for wet conditions, including outdoor installations. Ensure the chosen size matches your pipe and follow proper installation steps for a watertight seal.

Prepare the pipes by cutting to length and cleaning the ends. Use UPVC primer and solvent cement as recommended, apply to both the pipe end and inside the socket, push the pipe fully into the socket until it seats, and hold briefly until the bond sets to create a watertight connection.

The 2" UPVC Socket is primarily used for connecting two sections of 2-inch UPVC pipes in plumbing, drainage, irrigation, and electrical conduit systems, ensuring a secure and leak-proof joint.

It is made from high-quality UPVC (rigid polyvinyl chloride) material, which provides durability, corrosion resistance, and a long service life in wet environments.

A UPVC Socket is a straight pipe coupling used to join two UPVC pipes in irrigation and plumbing. It’s sold per piece and is designed to create a secure, leak‑proof connection between standard UPVC pipes.

A standard 2" UPVC Socket typically weighs around 0.10 kg and has approximate dimensions of 5.51 x 3.94 x 1.38 inches.

Yes, high-quality 2" UPVC Sockets are suitable for potable water and sewage systems, as they are non-toxic and do not affect water quality.