Atlas UPVC Tee 4", Equal Tee, Solvent-Weld, Balanced Flow, Clean Junction

The tee is available in inch sizes and is sold as a single piece per package.

This fitting is made from UPVC (unplasticized polyvinyl chloride), which is rigid, corrosion-resistant, and suitable for a wide range of piping applications. It helps provide durable, leak-resistant connections when installed with standard UPVC cementing methods.

It's well-suited for plumbing, irrigation, and other general piping projects that use UPVC piping, enabling a branch line to join the main run at a 90-degree angle.

Typical installation steps: cut the pipe square, deburr and clean the ends, apply UPVC primer to the pipe and inside the tee socket, apply solvent cement to both parts, insert the pipe into the tee socket, and hold briefly to ensure a proper bond. Allow the cement to cure before pressurizing the system.

Ensure the pipe size matches the tee’s nominal size. UPVC tees commonly use slip-fit sockets with solvent cement for a secure, watertight connection; confirm the size matches your existing piping and use the appropriate primer and cement.

For related options on Fepy, you can explore these alternatives: 90 Degree UPVC Tee - 1/2 inch (https://fepy.com/product/90-degree-upvc-tee-1-2-inch) and 90 Degree UPVC Tee - 1 inch (https://fepy.com/product/90-degree-upvc-tee-1-inch). These are the same style fittings in different inch sizes to fit your project.

Use the correct size, follow proper surface preparation (clean and deburred ends), apply primer to the pipe and socket, use the recommended cement, insert fully, and allow adequate curing time before applying pressure. Perform a pressure test after installation.

UPVC fittings are widely used in potable water applications. Always verify the exact rating or data sheet on the product page to ensure it meets your drinking water specifications.

Periodically inspect for signs of wear or cracks, especially at joint connections. Clean by rinsing with water if needed and avoid exposing the fitting to harsh chemicals that could degrade the cement or material.

Refer to Fepy’s Return Policy on the product page for details, including eligibility windows and conditions for returns. If in doubt, contact customer support for clarification.

Always wear appropriate PPE when cutting or cementing, work in a well-ventilated area, and follow manufacturer instructions for primers and solvent cement. Dispose of waste materials responsibly and ensure proper handling to avoid pipe misalignment or leaks.