4" x 90 Degree UPVC Tee - Per Pcs

Per Pcs indicates that the tee is sold individually, so you buy one tee per order and can multiply the quantity as needed.

The fitting is made from premium UPVC material and is UV resistant, making it suitable for outdoor use without quick degradation from sunlight.

It's ideal for plumbing and irrigation setups, allowing a three-way connection at a 90-degree angle. It’s versatile for both DIY projects and professional repairs.

This tee is designed for standard UPVC pipes. To ensure a proper fit, match the tee’s socket size with your pipe diameter and use the appropriate solvent cement or primer as recommended for UPVC piping.

Basic installation steps: cut and deburr the pipe ends, dry-fit to ensure alignment, apply UPVC primer (to both pipe ends and inside the socket if required), apply solvent cement, push the pipe into the socket fully, and hold for a few seconds to set. Allow appropriate curing time per the cement instructions.

Handle with care to avoid cracking. Wear basic PPE when cutting or handling pipes, ensure proper ventilation when using cement, and follow the product’s installation instructions for a safe, secure fit.

UPVC fittings are corrosion-resistant and designed for long-term use in plumbing and irrigation. They’re UV resistant for outdoor applications, but avoid excessive mechanical impact that could cause cracks.

This tee is intended for UPVC pipes only. If you need to connect to other materials, you may require adapters or different fittings designed for those materials.

For alternative 90-degree connections on UPVC, you can explore similar fittings on Fepy, such as: - 90 Degree UPVC Tee - 1 Inch: https://fepy.com/products/90-degree-upvc-tee-1-inch - UPVC Tee 90 Degree (20mm): https://fepy.com/products/upvc-tee-90-degree-20mm - UPVC Pipe Fittings (category): https://fepy.com/products/upvc-pipe-fittings These can be useful if you need a different size or variant (e.g., different socket sizes or 3-way vs. 2-way configurations).

Use this 90-degree UPVC Tee when you need to branch three pipes with a 90-degree orientation. If you only need a single 90-degree turn, an elbow might be more appropriate. If you need different configurations (e.g., reducing sizes or alternative angles), browse the UPVC fittings on Fepy to find the matching connector.

If you’re not satisfied, you can typically initiate a return within the store’s stated window, provided the product is unused and in original packaging. Please review Fepy’s return terms on the product page for exact conditions and timelines.