Vaultex KJM 10 Mtr Wire Rope Retractable Fall Arrester

Key specs: rope diameter 4.8 mm stainless steel, maximum working length 10 m, weight capacity 100 kg, strength rating 25 kN, housing material polyamide, included hardware (steel karabiner, swivel alloy, steel snap hook, conduit rope), color black, CE 0082 and EN 360:2002 certified.

Attach the steel karabiner to your safety harness D-ring, connect the arrester to a secure anchor point, ensure the swivel alloy is correctly oriented, and route the rope so it moves freely without snagging. The conduit rope provides extra protection and stability during use.

It's suitable for working at height in construction, maintenance, warehouses, roofing, scaffold tasks, and other environments where fall protection is required and a 10 m reach is advantageous.

It features a self-locking retractable mechanism and secure connections via the steel karabiner and steel snap hook. It meets CE 0082 and EN 360:2002 safety standards, with a 100 kg weight capacity and 25 kN strength rating.

Inspect the unit and rope for wear before each use, attach to a suitable harness and strong anchor, route the rope along a clear path, ensure the retractable mechanism moves freely, and perform a test pull to verify proper operation before starting work.

Keep it clean with mild soap and water, dry it thoroughly, inspect for signs of wear or damage after use, and store it in a dry place away from chemicals or direct sunlight to prevent material degradation.

If the rope jams or retraction is sluggish, stop using the device, inspect the rope for fraying or tangles, check the housing for damage, ensure the rope path is unobstructed, and refer to the manufacturer guidelines or contact support if the issue persists.

Yes. Do not exceed the 10 m working length or 100 kg weight limit. Ensure the anchor point can withstand at least 25 kN, avoid sharp edges that could damage the rope, and keep the rope path free of obstructions or friction points that could impair operation.

For different reach options, you can compare with Vaultex KJM 5m and Vaultex KJM 15m fall arresters on Fepy. 5m offers a more compact option, while 15m provides a longer reach. Alternatives: Vaultex KJM 5m Fall Arrester - https://fepy.com/product/vaultex-kjm-5m-fall-arrester; Vaultex KJM 15m Fall Arrester - https://fepy.com/product/vaultex-kjm-15m-fall-arrester.

The 10 m model strikes a balance between reach and bulk. It provides substantial reach for many standard-height tasks, strong build quality with 100 kg capacity and 25 kN strength, and comes with essential hardware, all while maintaining a manageable weight and cost compared to longer variants.

Choose an appropriate anchor point rated for at least 25 kN, route the rope away from edges and sharp surfaces, avoid tangles or kinks, ensure the harness D-ring is in good condition, and perform a pre-work test of retraction and locking to confirm proper function before starting the task.