Vaultex UIC Twin Webbing Tool Safety Lanyard

Key specs: maximum length 2 meters; made of 100% polyester; shock-absorbing type; Y-shaped design with two legs; single dorsal D-ring and two chest D-rings; sit strap; adjustable shoulder and thigh straps; included components: twin webbing, karabiner, and two scaffoldings; color black/red; compliant with EN 355:2002, CE, ANSI Z359.13-2013, and OSHA regulations.

The package includes the twin webbing lanyard, a karabiner, two scaffoldings, adjustable shoulder and thigh straps, a dorsal attachment D-ring, two chest attachment D-rings, and a sit strap.

Put on your safety harness (crossover style), then attach the lanyard’s dorsal D-ring to the harness. Connect the anchor using the karabiner. Adjust the shoulder and thigh straps for a snug fit, position the sit strap for comfort, and ensure the two chest D-rings are properly aligned. Avoid twists in the webbing and verify the shock absorber is unobstructed before use.

This lanyard complies with EN 355:2002, CE marking, ANSI Z359.13-2013, and OSHA regulations, reflecting its safety performance and design qualifications for use in construction and scaffolding environments.

A twin-webbing lanyard is advantageous when you want distributed load through two legs, flexible movement with an easier connection to anchor points, and enhanced stability on uneven scaffolding surfaces. It’s a good choice for tasks requiring multiple attachment points and extended use with a crossover harness.

Ideal for construction and scaffolding work at height, maintenance on elevated structures, and any job requiring fall protection while working near edges or openings where a secure connection to an anchor point is essential.

1) Put on and adjust your harness. 2) Attach the lanyard’s dorsal D-ring to the harness back. 3) Connect the karabiner to the anchor point. 4) Ensure the two chest D-rings are in proper position and adjust the shoulder and thigh straps for a secure fit. 5) Check that the sit strap sits comfortably and that the webbing has no twists or damage before starting work.

Inspect the lanyard before each use for cuts, fraying, abrasions, or damaged hardware. Check the karabiner and D-rings for corrosion or deformation. Clean with a mild damp cloth if needed and air-dry completely. Store in a cool, dry place away from direct sunlight. Replace immediately if any damage, nicks, or deformation is found or after a significant impact.

If you’re evaluating alternatives on Fepy, here are similar options you might consider: - Vaultex UIC Single Webbing Tool Safety Lanyard: https://fepy.com/product/vaultex-uic-single-webbing-tool-safety-lanyard - ZECCHIN 2-Point Scaffold Lanyard: https://fepy.com/product/zecchin-2-point-scaffold-lanyard - ZECCHIN Shock-Absorbing Lanyard EN 355: https://fepy.com/product/zecchin-shock-absorbing-lanyard-en355 These provide different configurations (single webbing, two-point setups, or varying shock-absorber features) to suit different harnesses and job-site needs.

If you need to return or exchange, you can initiate the process through Fepy’s returns channel by contacting support with your order details. Ensure the product is unused and in its original packaging if applicable, and follow the guidance provided by Fepy to complete the return or exchange.