Veto 10A 1 Gang 1 Way Switch

Key features include a 10A rated switch for overload protection, automatic reset capability, a mounting footprint for easy installation, large terminals for a wide range of wire sizes, and optional accessories like an External Reset Handle and a visual LED indicator for quick power interruptions identification.

Rated current: 10A. Designed for one‑phase circuits. It supports easy on/off operation, large terminals for versatile wiring, and is suitable for use in factories, offices, homes, and similar environments.

When an overload or fault is detected, the switch trips to cut power. After the fault is cleared, the switch can automatically reset and re-energize the circuit, helping to prevent overheating of motors or appliances.

Power should be off before installation. Mount the switch using its mounting holes, connect wires to the large terminals per the wiring diagram, and verify the connections are secure. If needed, install optional accessories like the External Reset Handle and LED indicator for easier operation and fault visibility.

It is ideal for protecting one‑phase circuits controlling motors, appliances, small equipment, control panels, and general electrical installations in factories, offices, and homes where overload protection and simple manual control are required.

Yes. The External Reset Handle can be installed for manual reset, and an LED indicator can be added to quickly identify power interruptions or status at a glance.

Operate within the 10A rating on a suitable single‑phase supply. Use appropriate wiring sizes for the large terminals, ensure proper insulation and enclosure, and follow local electrical codes and best practices for safe installation and maintenance.

If you’re evaluating alternatives on Fepy, you can compare with these similar products: - Veto 16A Switch: https://fepy.com/product/veto-16a-switch - Veto 10A Switch with Manual Reset: https://fepy.com/product/veto-10a-switch-manual-reset - Veto 10A Mini Circuit Breaker: https://fepy.com/product/veto-10a-mcb - Veto LED Indicator Module: https://fepy.com/product/veto-led-indicator-module These options offer different current ratings or accessories while maintaining the same general purpose of circuit protection and control.

Consider the actual load current, motor starting inrush, and future expansion. If your current needs are firmly within 10A and you want a compact, simple protection solution, the 10A option is appropriate. If you anticipate higher loads or more headroom, a higher‑rating switch may be more suitable.

For return options and eligibility, please refer to the Returns section on the Veto 10A Switch product page on Fepy. It outlines the conditions, timeframe, and steps to initiate a return.