WD-40 Multi-Use Aerosol Spray All-Purpose Lubricant and Rust Remover 330ml
FREE Returns
Upgrade to Fepy Pro and get up to 10% off all orders.
- WD-40 Multi-Use Product 330 ml aerosol, the original five-in-one formula that lubricates, penetrates, protects, removes and displaces moisture, with more than 2,000 documented uses since 1953.
- Penetrates rust and corrosion to free seized nuts, bolts, valves, locks and hinges, and leaves a thin lubricating film that stops squeaks on chains, rollers, pulleys and gears.
- Displaces moisture to dry out electrical contacts, ignition systems and water-damaged tools, and shields metal, tools and equipment against rust in humid, coastal conditions.
- Removes grease, tar, adhesive residue, grime and light corrosion from steel, brass, copper, galvanised metal, most plastics and painted surfaces; silicone free, with no CFCs, lead or cadmium.
- Works from -50 C to +150 C; the straw applicator gives a precise stream in tight spots or a wide spray for larger areas. Avoid clear polycarbonate, polystyrene and waxed finishes.
Key Features
- 100% free subscription
- Easy Registration
Features & Benefits
Pack
1 can, sold per piece; carton of 24 available as 25505-CTN
Brand
WD-40 Company
Product
WD-40 Multi-Use Product
Size
330 ml aerosol can
Form
Aerosol spray with straw applicator for precise or wide spray
Appearance / odour
Light amber liquid, mild petroleum odour
Specific gravity
0.81 at 25 C
Flash point
83 C (closed cup)
Pour point
-38 C
Service temperature
-50 C to +150 C
Dielectric strength
38,000 volts per 0.1 inch (2.5 mm)
VOC content
24.5 percent by weight
Free from
CFCs, HCFCs, lead, mercury and cadmium; contains no silicone
Compatible with
Steel, galvanised and plated steel, copper, brass, zinc, magnesium, nickel, titanium, acetal, HDPE, neoprene and hard rubber, PTFE, Viton, painted surfaces
Avoid on
Clear polycarbonate and polystyrene (may craze), prolonged immersion of soft rubber, waxed surfaces
Functions
Lubricates, penetrates, protects, removes, displaces moisture
Typical uses
Freeing rusted nuts, bolts, valves and locks; lubricating hinges, chains, rollers, pulleys, gears, tools and machinery; drying out electrical contacts, ignition systems and power tools; removing grease, tar, adhesive residue and corrosion; protecting metal and tools from rust
Directions
Shake the can, spray on the part from 10 to 20 cm, allow a few minutes to penetrate on seized parts, wipe off excess; for electrics switch off power first
Shelf life
5 years from date of manufacture in the original unopened can
Storage
Store below 50 C away from heat, flame and direct sun; pressurised container
Key Specifications
Custom Stock Status
In Stock
Weight
0.50 kg
Brands
GENERIC
Size
330 ml
Quantity Unit
PCS
Best Seller
No
Unit
Individual
Model No
WD-40 Multi-Use Product
Product Attachments
Download technical documentation, manuals, and certification documents
25505-NOS_Data_Sheet
Download all product documents in a single ZIP file.
1 PDF
Product Attachments
Swipe to browse documents
25505-NOS_Data_Sheet
Download All
1 PDF
Frequently Asked Questions
What is WD-40?
WD-40 is a versatile lubricant, penetrant, and moisture displacer designed to protect surfaces from corrosion and remove adhesives. It's commonly used on moving parts such as hinges, wheels, and chains.
What are the main components of WD-40?
The primary ingredients in WD-40 include aliphatic hydrocarbons (45-50%), petroleum-based oils, and various additives that contribute to its effectiveness as a lubricant and corrosion inhibitor.
What are the safety hazards associated with WD-40?
WD-40 is classified as an extremely flammable aerosol and poses aspiration toxicity risks if ingested. It may cause eye irritation and should be used in well-ventilated areas, away from heat and ignition sources.
What is the operating temperature range for WD-40?
WD-40 operates effectively within a temperature range of -60°F to 300°F (-50°C to 150°C), making it suitable for various applications, from outdoor tools to machinery in extreme conditions.
How does WD-40 protect against corrosion?
WD-40 protects against corrosion by creating a barrier that prevents moisture from contacting metal surfaces. It has a corrosion protection effectiveness of 0-20% in 72 hours, depending on the application.
Can WD-40 be used on all surfaces?
While WD-40 is compatible with most surfaces, it can cause certain types of rubber to swell or soften wax coatings. It is recommended to test on a small area first, especially on plastics and rubbers, to ensure compatibility.
What are the recommended storage conditions for WD-40?
WD-40 should be stored in a cool, well-ventilated area away from direct sunlight and heat sources. The storage temperature should not exceed 50°C (122°F) to prevent pressure build-up in the aerosol can.
What should I do if WD-40 is ingested?
If WD-40 is ingested, do not induce vomiting. Instead, seek immediate medical attention or contact a poison control center, as the product poses serious health risks if aspirated into the lungs.
Frequently Asked Questions
WD-40 is a versatile lubricant, penetrant, and moisture displacer designed to protect surfaces from corrosion and remove adhesives. It's commonly used on moving parts such as hinges, wheels, and chains.
The primary ingredients in WD-40 include aliphatic hydrocarbons (45-50%), petroleum-based oils, and various additives that contribute to its effectiveness as a lubricant and corrosion inhibitor.
WD-40 is classified as an extremely flammable aerosol and poses aspiration toxicity risks if ingested. It may cause eye irritation and should be used in well-ventilated areas, away from heat and ignition sources.
WD-40 operates effectively within a temperature range of -60°F to 300°F (-50°C to 150°C), making it suitable for various applications, from outdoor tools to machinery in extreme conditions.
WD-40 protects against corrosion by creating a barrier that prevents moisture from contacting metal surfaces. It has a corrosion protection effectiveness of 0-20% in 72 hours, depending on the application.
While WD-40 is compatible with most surfaces, it can cause certain types of rubber to swell or soften wax coatings. It is recommended to test on a small area first, especially on plastics and rubbers, to ensure compatibility.
WD-40 should be stored in a cool, well-ventilated area away from direct sunlight and heat sources. The storage temperature should not exceed 50°C (122°F) to prevent pressure build-up in the aerosol can.
If WD-40 is ingested, do not induce vomiting. Instead, seek immediate medical attention or contact a poison control center, as the product poses serious health risks if aspirated into the lungs.
Ratings & Reviews
See what customers are saying
Based on 10 reviews
100%
Would recommend
Samir Sharif
Worked well on my bicycle tyres. A must-have for every household!
Worked well on my bicycle tyres. A must-have for every household!
Farah Jassim
I applied WD-40 to my bike chain, and it runs smoother than ever!
I applied WD-40 to my bike chain, and it runs smoother than ever!
Huda Al-Jabri
Perfect for maintaining my tools and equipment. Thumbs up!
Perfect for maintaining my tools and equipment. Thumbs up!
Based on 10 reviews
100%
Would recommend
Samir Sharif
Worked well on my bicycle tyres. A must-have for every household!
Worked well on my bicycle tyres. A must-have for every household!
Farah Jassim
I applied WD-40 to my bike chain, and it runs smoother than ever!
I applied WD-40 to my bike chain, and it runs smoother than ever!
Huda Al-Jabri
Perfect for maintaining my tools and equipment. Thumbs up!
Perfect for maintaining my tools and equipment. Thumbs up!
Similar Products
More from GENERIC
Bestsellers from Cleaning Chemicals
Why Buy From Fepy
We provide the best shopping experience
Manufacturer Warranty
Official warranty coverage from brand manufacturers
99% Claims resolved
Cash on Delivery
Choose Cash or Card as your payment
AED 100+ Min. order value
Secure Payment
100% secure payment processing
256-bit SSL encryption
Free Delivery
On all orders above AED 200 across UAE
Same Day In Abu Dhabi & Dubai
100% Genuine
Authentic products guaranteed
Authorized Distributor
Free Returns
7-day easy return policy
No questions Asked policy
Years Experience
UAE Stores
Happy Customers
Products
Trusted by Leading Brands
We are authorized distributors for top global brands
Manufacturer Warranty
Official warranty coverage from brand manufacturers
99% Claims resolved
Cash on Delivery
Choose Cash or Card as your payment
AED 100+ Min. order value
Secure Payment
100% secure payment processing
256-bit SSL encryption
Free Delivery
On all orders above AED 200 across UAE
Same Day In Abu Dhabi & Dubai
100% Genuine
Authentic products guaranteed
Authorized Distributor
Free Returns
7-day easy return policy
No questions Asked policy