Weber Webercol Fix Cementitious Tile Adhesive White - 20Kg - For Fixing Ceramic Wall & Floor Tiles

Available in grey or white, with a density of approximately 1.60 kg/litre, an open time of 15 minutes, and a pot life of 4 hours.

Suitable for concrete, stone walls, and cementitious plaster. Not recommended for gypsum substrates, swimming pools, or facades.

Mix 4 to 4.8 litres of clean water per 20 kg bag.

Initial set time is approximately 570 minutes; final set time is around 750 minutes. Grouting should be done after at least 24 hours.

Coverage varies between 3 to 7 kg per square meter.

Not suitable for gypsum substrates, swimming pools, or low-absorption tiles. Adjustments should be made within the open time.

Ensure the substrate is clean, wear protective gear, and clean tools with water immediately after use.

Webercol Fix is a ready-mix cement-based tile adhesive designed for internal use. It is suitable for fixing various ceramic tiles on surfaces like concrete, stone walls, and cementitious plaster. It is not recommended for gypsum substrates or outdoor use.

Webercol Fix is water-resistant, has a strong bonding effect, and is easy to apply. It provides a non-slip surface and is suitable for use in wet and dry conditions, making it ideal for bathrooms and kitchens. It is available in white and grey colours.

To prepare Webercol Fix, mix 4 to 4.8 litres of clean cool water with a 20 kg bag. Use an electric mixer at low speed (< 300 rpm) until a uniform paste is achieved. Let it rest for a few minutes before application. Apply evenly on the substrate using a notched trowel.

The drying time for Webercol Fix is approximately 4 hours, but grouting should be done at least 24 hours after application.

No, Webercol Fix is not suitable for low-porosity tiles or outdoor use. It is designed specifically for internal applications and ceramic tiles with adequate porosity.

Tools should be cleaned with water immediately after use. Once cured, any remaining material can only be removed mechanically.

Yes, you can mix Webercol Fix with a bonding agent like Weberad 225 MB for exceptional performance. For a 20 kg bag, use 1 litre of the bonding agent with 3 litres of clean water.