Weber Weberjoint Deco 126 Thick Tile Grout - Chocolate - 4.5Kg - For Decorative Tile Joints

Technical specifications: This grout is designed for joint widths between 2 to 8 mm, has a pot life of 90 minutes, and requires about 1.35 litres of water per 5 kg bag. It dries in approximately 24 hours under standard conditions (20ºC, 50% humidity) and should not be applied in temperatures below 5ºC or above 30ºC.

Mixing and application: To mix, combine the grout with 1.35 litres of water per 5 kg bag until a thick, creamy paste forms. Apply using a squeegee or rubber float, ensuring joints are completely filled. Remove excess grout immediately to avoid hardening on the tile surface.

Recommended surfaces: It is suitable for various surfaces like walls and floors, especially in intermittently wet areas. It is not recommended for chemically resistant applications or where complete impermeability is required.

Under-tile heating systems: Yes, Weberjoint Thick Tile Grout can be used with under-tile heating systems, as its limited flexibility accommodates some movement without compromising joint integrity.

Precautions: Ensure surfaces are clean and free from grease or contaminants. The adhesive for tiling should dry for at least 24 hours before grouting, and avoid excessive moisture during cleaning to prevent grout discoloration.

Colour options: Available in multiple colours, including Chocolate (126), offering aesthetic flexibility for tile installations.

Weberjoint Thick Tile Grout 5Kg is a professional-grade grout designed to fill the joints between tiles. It provides high adhesion and a durable finish, suitable for tiles of all sizes on walls and floors. The product is formulated to be quick-drying and easy to work with, helping to speed up tile installations.

Weberjoint Thick Tile Grout 5Kg is designed for use with a wide range of tile types and sizes. For best results, ensure the substrate is clean, sound, and fully cured before grouting, and follow the manufacturer's guidelines for surface preparation and compatibility with specific tile types.

Key properties include high adhesion, low shrinkage, and a durable, crack- and break-resistant finish. It dries quickly to minimize downtime, provides good stain resistance, and is designed to produce a smooth, professional-looking grout line with less dust during application and cleanup.

Follow the product packaging instructions for mixing. Typically, you would add the specified amount of clean water to the grout powder to achieve a workable paste with a consistent, lump-free texture. Apply the grout into the joints using a rubber float, press it in firmly, remove excess grout, and clean the tile surface with a damp sponge before the grout fully hardens. Allow adequate cure time as recommended on the bag.

Weberjoint Thick Tile Grout 5Kg dries quickly and reaches handling readiness sooner than some traditional grouts. Full curing time depends on temperature, humidity, and airflow. Always refer to the product label for the recommended cure times and avoid heavy use or immersion until fully cured.

Compared with standard grouts, Weberjoint Thick Tile Grout 5Kg emphasizes a higher strength-to-weight ratio and lower dust during handling and cleanup. It is designed to deliver strong adhesion with a durable finish and easier workability, which can translate to faster installations and fewer repairs.

After grouting, use a damp sponge to remove any residue from tile surfaces while the grout is still working. Allow the grout to cure fully, then clean with a non-abrasive cleaner if needed. Avoid harsh acids or aggressive cleaners that could damage the grout surface, and maintain good ventilation during curing.

Yes. Wear appropriate PPE such as gloves and eye protection during mixing and grouting, work in a well-ventilated area, and follow the Safety Data Sheet and local regulations. Store the product in a cool, dry place away from moisture and out of reach of children.