Weber Weberjoint 180 Thick Tile Grout - Black - 5Kg - For Tile Joints (3-15 mm)

The grout can be used for joint widths ranging from 2 mm to 8 mm. It is important to ensure that the minimum joint width is maintained, with 2 mm for walls and 3 mm for floors to achieve optimal results.

To mix the grout, you will need 1.35 litres of clean water per 5 kg of grout. After mixing, let the mixture stand for about 5 minutes before remixing thoroughly to achieve a creamy paste consistency.

The pot life of the mixed grout is approximately 90 minutes, allowing sufficient time for application. The final drying time is around 24 hours at 20ºC and 50% humidity, after which the grouted joints can be polished.

The grout should not be applied in temperatures below 5ºC or above 30ºC, as these conditions can affect its performance. Additionally, it is not suitable for areas requiring chemically resistant or completely impermeable grouting solutions.

Yes, Saint-Gobain Weberjoint Thick Tile Grout 180 Black can be used in conjunction with under-tile heating systems. It has limited flexibility to accommodate some movement, making it ideal for various applications.

This grout is suitable for both walls and floors, making it versatile for use in kitchens, bathrooms, and showers. However, it should not be used on surfaces that require high chemical resistance.

Ensure that the tiles and joints are clean and free from grease or contaminants before application. Excess grout should be removed immediately using a squeegee held at a 90-degree angle to prevent voids in the joints.

Weberjoint Thick Tile Grout 5Kg is a professional-grade grout designed to fill the joints between tiles. It provides high adhesion and a durable finish, suitable for tiles of all sizes on walls and floors. The product is formulated to be quick-drying and easy to work with, helping to speed up tile installations.

Weberjoint Thick Tile Grout 5Kg is designed for use with a wide range of tile types and sizes. For best results, ensure the substrate is clean, sound, and fully cured before grouting, and follow the manufacturer's guidelines for surface preparation and compatibility with specific tile types.

Key properties include high adhesion, low shrinkage, and a durable, crack- and break-resistant finish. It dries quickly to minimize downtime, provides good stain resistance, and is designed to produce a smooth, professional-looking grout line with less dust during application and cleanup.

Follow the product packaging instructions for mixing. Typically, you would add the specified amount of clean water to the grout powder to achieve a workable paste with a consistent, lump-free texture. Apply the grout into the joints using a rubber float, press it in firmly, remove excess grout, and clean the tile surface with a damp sponge before the grout fully hardens. Allow adequate cure time as recommended on the bag.

Weberjoint Thick Tile Grout 5Kg dries quickly and reaches handling readiness sooner than some traditional grouts. Full curing time depends on temperature, humidity, and airflow. Always refer to the product label for the recommended cure times and avoid heavy use or immersion until fully cured.

Compared with standard grouts, Weberjoint Thick Tile Grout 5Kg emphasizes a higher strength-to-weight ratio and lower dust during handling and cleanup. It is designed to deliver strong adhesion with a durable finish and easier workability, which can translate to faster installations and fewer repairs.

After grouting, use a damp sponge to remove any residue from tile surfaces while the grout is still working. Allow the grout to cure fully, then clean with a non-abrasive cleaner if needed. Avoid harsh acids or aggressive cleaners that could damage the grout surface, and maintain good ventilation during curing.