Wefatherm 40mm x 45 Degree PPR Elbow

It’s molded from polypropylene homopolymer resin for durability and safety with potable water. It’s extrusion‑made and annealed to strengthen the part, features a built‑in memory to resist external stresses, and is designed to form a water‑tight seal with minimal maintenance.

The elbow is available in multiple sizes to suit different PPR pipe diameters. Check the product page options on Fepy to choose the correct size for your piping system.

The elbow is produced by extrusion of the resin into the elbow shape, followed by annealing to relax the polymer chains and improve ductility, ensuring a secure and durable connection.

The memory property helps the elbow resist deformation and helps the joint maintain a secure connection under changing loads, contributing to long‑term reliability in piping systems.

Yes, it’s designed to withstand heat and pressure typical of potable water and heating applications. Always ensure you select the correct size and joining method for your system's temperature and pressure ratings.

For PPR systems, prepare by cutting the pipe square and deburring, clean the pipe and socket, dry‑fit the elbow, and join using the recommended method for your system (socket fusion/heat fusion or approved adhesive). Allow adequate curing time and check for leaks after installation.

Use only compatible Weatherm PPR fittings with PPR pipes, and install in accordance with local plumbing codes. The material is designed for potable water, but avoid exposing it to incompatible chemicals and ensure proper ventilation and personal protective equipment during installation.

If you’re building a complete PPR network, you may also want these Weatherm fittings on Fepy: Weatherm PPR 90‑Degree Elbow (https://fepy.com/product/weatherm-ppr-90-degree-elbow), Weatherm PPR Tee (https://fepy.com/product/weatherm-ppr-tee), Weatherm PPR Coupling (https://fepy.com/product/weatherm-ppr-coupling), Weatherm PPR Reducer Elbow (https://fepy.com/product/weatherm-ppr-reducer-elbow), Weatherm PPR End Cap (https://fepy.com/product/weatherm-ppr-end-cap).

It’s well‑suited for domestic water supply lines, radiant floor heating, and irrigation systems where PPR piping is used, providing a durable and leak‑tight elbow connection in these networks.

Measure your PPR pipe diameter, refer to the product’s size options, and match the elbow size to your pipe. Follow the recommended joining method and installation steps from your PPR system guide or Fepy’s product page to ensure a proper fit and seal.

Fepy typically supports returns on eligible items within the stated window and conditions. To confirm the current return policy, check the product page or your order details on Fepy.