Winsor & Newton Professional Fixative Spray, 150 ml, Clear, Workable Protection for Dry Media, Suitable for Professional Use

It is formulated for charcoal, pencil, and pastel. It’s best used on dry media surfaces and is not intended for wet media.

The fixative forms a thin, clear film that stabilizes the surface without making it hard to draw over. This lets you add more drawing after the first coat while keeping the original marks protected.

Hold the can about 25–30 cm (10–12 inches) from the surface and apply multiple light passes rather than one heavy coat. Move steadily across the drawing to avoid pooling, and test on a scrap area before applying to the final piece.

Typically 2–3 light coats work well. Allow about 5–15 minutes between coats, depending on room temperature and humidity, and always test on a spare area first.

The spray dries to the touch in minutes. Full curing can take longer, so wait at least 15–30 minutes before handling more extensively, especially if you applied multiple coats.

Volume: 150 ml. Finish: clear, protective film. Type: workable fixative that dries quickly. Compatibility: suitable for charcoal, pencil, and pastel.

Yes, you can add drawing between coats while the surface remains workable. After the final coat has dried, reworking becomes more limited, but you can still make light adjustments with appropriate tools on a lightly fixed surface.

As an aerosol fixative, use in a well-ventilated area away from heat or open flames. Avoid inhaling fumes; keep the can away from children and pets. Do not puncture or incinerate the can, and store upright in a cool place.

Use in good ventilation, wear a mask if you’re sensitive to fumes, and follow local disposal regulations for aerosols. When empty, the can can be recycled where allowed by local programs; never puncture a full or partially full can.

Consider media compatibility (charcoal, pencil, pastel), the level of protection you need, whether you want to preserve workability between layers, the spray’s drying time, and the price per application. Comparing these aspects with other fixatives on Fepy will help you pick the best option for your workflow.

After spraying, point the can away from you and spray briefly to clear the nozzle. Store the can upright in a cool, dry place. Avoid exposing the can to heat or direct sun.