Zecchin KFM UB105+WL30, 2Mtr Twin Webbing Shock Absorbing Lanyard

Key specs include: fall arrester working length up to 12 m, 25 kN strength capacity, 4 mm stainless steel rope in the arrester, polyamide casing, steel karabiner, swivel alloy, steel snap hook, conduit rope, CE certification (CE 0082), and EN 360:2002 safety standard. The lanyard portion is a 2 m twin webbing design with shock-absorbing features.

You should receive the VAULTEX fall arrester assembled with a 2 m twin-webbing shock-absorbing lanyard, the stainless steel rope assembly, a steel karabiner, a swivel alloy, a steel snap hook, and conduit rope, all housed in a polyamide-cased unit designed for safety.

Installation steps in brief: 1) Inspect all components for wear or damage before use. 2) Attach the fall arrester to a suitable anchor point using the karabiner. 3) Connect your harness to the lanyard as per your training. 4) Ensure the 12 m arrester length is not obstructed and the lanyard is not twisted. 5) After use, inspect again and store properly in a dry place away from heat.

Ideal for work-at-height scenarios such as roofing, construction, maintenance on towers or scaffolding, wind/telecom installations, and any activity requiring fall protection where a robust arrester and shock-absorbing lanyard are beneficial.

The device is CE certified and complies with EN 360:2002 safety standards. It features a 25 kN strength rating and uses a polyamide casing with a 4 mm stainless steel rope for enhanced durability and reliability.

Regularly inspect for cuts, fraying, corrosion, or deformation on all metal parts and the webbing. Clean with a damp cloth if needed, avoid exposure to heat or chemicals, store in a dry, shaded area, and retire the unit if you notice any significant wear, damage, or if it fails any inspection checks.

This model emphasizes a 12 m arrester working length with a 25 kN rating and a polyamide housing, paired with a 2 m twin-webbing lanyard. Compared to other Vaultex options, you may see differences in arrester length, rope diameter, or hardware configurations. For example, Vaultex 12 m EN360 products tend to share the same safety standard but may differ in housing materials or connector types. See Vaultex equivalents on Fepy to compare specifics side-by-side: https://fepy.com/product/vaultex-fall-arrester-12m-en360 and https://fepy.com/product/vaultex-fall-arrester-12m-en360-25kn

Non-Vaultex lanyards may vary in materials (fabric vs. rope), length, and anchor hardware. When comparing, consider working length, energy absorption, compatibility with your harness, and certification standards (EN 360:2002, CE). A couple of alternative lanyards on Fepy you can explore are: https://fepy.com/product/3m-fall-protection-lanyard-2m and https://fepy.com/product/zecchin-kfm-ub105-wl30-2m-twin-webbing-lanyard

Yes, for professionals requiring reliable fall protection, the combination of a 12 m VAULTEX arrester with a 2 m twin-webbing lanyard, CE/EN360:2002 certification, and solid hardware offers a robust safety solution. The value increases with proper usage, inspection, and adherence to safety standards, reducing risk and downtime on high-risk work.

Store in a dry, cool place away from direct sunlight and chemicals. Keep all components free from moisture, grit, and contamination. Regularly inspect, ensure no twisting or knotting in the webbing, and avoid placing heavy objects on top of the gear.

You can explore related items on Fepy’s site by category filters such as fall arresters and shock-absorbing lanyards. For direct comparisons, you can check Vaultex alternatives like vaultex-fall-arrester-12m-en360: https://fepy.com/product/vaultex-fall-arrester-12m-en360 and vaultex-fall-arrester-12m-en360-25kn: https://fepy.com/product/vaultex-fall-arrester-12m-en360-25kn, as well as other lanyards like 3m-fall-protection-lanyard-2m: https://fepy.com/product/3m-fall-protection-lanyard-2m