مفتاح الربط الصدمي اللاسلكي السداسي ميلووكي قياس (1/4") ببطارية (18V) موديل (M18FID2-0X Fuel) يباع دون ملحقات

The Milwaukee M18FID2-0X is a high-performance 18V cordless hex impact driver designed for professional fastening. It features a 1/4" hex drive, no-load speed up to 3,600 RPM, and an impact rate up to 4,300 IPM for rapid high-torque tightening. It uses a brushless motor for efficiency and durability, has a compact profile for tight spaces, and is compatible with the M18 battery platform, letting you use it with your existing M18 tools and packs.

In Milwaukee terminology, 'Fuel' signals a high-performance brushless motor paired with a robust drivetrain and advanced gear system. It indicates enhanced durability, efficiency, and power delivery for demanding fastening tasks.

Key specs include: 1/4" hex drive; 0–3,600 RPM no-load speed; 0–4,300 IPM; brushless motor for longer life and better efficiency; Precision Drive Control for controlled fastening; compact design; bright LED work light; adjustable belt clip; compatible with all M18 batteries and over 200 M18 tools.

It's ideal for heavy-duty fastening in tight spaces, including decking and cabinetry installation, lag bolts, bolts and metal fasteners, and other high-torque driving tasks where speed and control are important.

Steps: (1) Insert a charged M18 battery into the tool. (2) Insert a 1/4" hex driver bit into the chuck. (3) Power on and select the appropriate drive mode using Precision Drive Control for the desired torque. (4) Use the LED light to illuminate the work area. (5) Begin fastening with controlled, steady pressure.

To change the bit, pull back the collet/bit clip to release the current bit, remove it, and insert a new 1/4" hex bit. Release the collet to secure the bit in place, ensuring it is fully seated before use.

Always wear proper PPE (eye protection, hearing protection as needed, and gloves if desired). Keep loose clothing, hair, and jewelry away from the chuck. Maintain a firm two-handed grip, use the LED light to improve visibility, and avoid using a damaged battery or tool. Disconnect the battery when changing bits or performing maintenance, and inspect fasteners for proper sizing before driving.

This tool is part of the Milwaukee M18 system and is compatible with all M18 batteries. You can mix and match with other M18 tools in your collection, and the platform is designed to support hundreds of M18 products for common charging and runtime experiences.

Choosing the bare tool allows you to reuse your existing M18 batteries and charger, saving cost if you already own the battery system. It’s a good fit for someone who already has M18 components and just needs the driver head.

Similar 18V Milwaukee hex impact drivers on Fepy.com include: Mil waukee M18FID2-0 (Bare Tool): https://fepy.com/product/milwaukee-m18fid2-0; Milwaukee M18FID2-0X Fuel 1/4" Hex Impact Driver Kit: https://fepy.com/product/milwaukee-m18fid2-0x-fuel-1-4-hex-impact-driver-kit; Milwaukee M18FID1-0 (Bare Tool): https://fepy.com/product/milwaukee-m18fid1-0. The M18FID2-0 is another bare tool variant, while the kit version typically includes a battery and charger, and the M18FID1-0 offers a closely related setup with a possibly different feature set. Compare based on your battery ownership and whether you want a kit or bare tool.

First, ensure the battery is charged and properly seated. Check that the bit is fully seated in the 1/4" hex chuck and that it is compatible with the tool. Inspect the belt clip/gear housing for any obstructions, and attempt a gentle reset by removing and re-inserting the bit and/or battery. If the issue persists, avoid forcing the tool and consult product support for service guidance.