Henkel Pattex 11ml Xtra Strong Epoxy Adhesive

The mixing ratio for Pattex Epoxy Xtra Strong is 1:1 by volume. After mixing, the working time is approximately 5 minutes, with a curing time of about 60 minutes and a final cure achieved in 24 hours.

This epoxy adhesive can endure temperatures ranging from -30°C to +150°C, depending on the duration of exposure to heat and stress. This makes it suitable for various environmental conditions.

Surfaces should be clean, free of dust, grease, and any contaminants to ensure optimal adhesion. It's recommended to apply the adhesive between 15°C and 30°C for best results.

Yes, once fully cured, the bond can be sanded, painted, or polished. This allows for a seamless finish in your repair projects.

Pattex Epoxy Xtra Strong should be stored in a cool, dry place. If unopened and stored correctly, it has a shelf life of up to 36 months.

It is advisable to wear gloves during prolonged exposure to the adhesive. Additionally, hands should be washed with warm soapy water after use to prevent skin irritation.

This adhesive is effective on a wide range of materials including wood, metal, glass, ceramics, concrete, and many plastics. Its strong bonding capabilities make it suitable for various repair applications.

Pattex Power Epoxy is a fast-setting adhesive. It typically sets within a short period, allowing for quick bonding.

Yes, the glue line formed is resistant to water, fuels, grease, as well as diluted acids and alkali, ensuring durability in different conditions.

Yes, once the adhesive has set, it can be sanded and painted for a finished look, providing versatility in different projects.